cover

150 eur + shipping Located in Estonia

Hi all, I'm Tanel and I am new here. I recently bought FE 550 E 2006 and everything seemed good till I noticed that clutch cover case, where oil is filled, thread is broken, it is snapped inside (half of it seems to be missing). Oil plug still works and seals (maybe small leak). But question is...

Been checking with dealers, on Ebay, etc. with no luck. Only option seems to be Israel at 200 Euros. Would prefer to purchase in USA to allow for quicker delivery. Riding season is upon northern Nevada and no time to waste. I understand 2004-2008 FE450, FE550 and FE650 all use the same clutch...

I have a 08 550fe that I just did a full rebuild on (well full breakdown and only replaced piston and cam chain because everything else seemed to be in good shape). After reassembling and getting the bike running it was very hard to try and kick after about 2 15 minute riding sessions. To my...

A follow-up question to my oil change parts thread. I've learnt while doing my oil change that I've inherited a problem with 1 of the 2 bolts, the interior thread (in the bore) is stripped...therefore the bolt threads in okay and just spins, without holding any. I'm attaching a pic for...

Best or Nothing! Husaberg 390 / 450 / 570 Kuntzinger Clutch and Ignition covers Highest quality for durable, hardest use. Proven in German Supermoto championship and by Kuntze himself or course. We need 7 people for each item to make it worth Kuntzes efforts. So get yours now. Only on...

Anyone which KTM models I can use to swap out my clutch cover with? Will the 2007 to 2011 KTM 400 and 450/505 models fit?

Wanted air filter wash cover for 2010 450 FX.

Hello! Husaberg FE450 2005 seems to have a problem. Engine ran perfectly but pushed oil trough the breather hose from valve cover. I got sure i got right amount of oil so it wasnt about that. Then i did the engine repair (piston, crankshaft, crankbearings and seals and new waterpump)...

Hello, im interested in buying a water pump cover for my 650 if anyone knows where i could buy one? Mine is cracked and leaking. -Rune

Does anyone sell or know from where to buy valve cover for Husaberg 600cc

not a april fools day joke, my bike fell over off the side stand and smashed the clutch cover any out there .this sucks as we are coming into spring here in Canada .Just my luck:cry::

Hi, anyone have a 80036010050 closing cover? Found that part number for an 04 fe450. My bike is an 02 fc470. They look the same. Mine measures about 32mm. Thanks

Good morning folks. To whom it may concern: I have produced some anodized/reinforced clutch cover made of Aluminum AW 7075. If this is the wrong place to put this up, i am sorry. https://www.motoren-israel.com/Husaberg/Eigene-Produkte/Kupplungsdeckel-Racing-eloxiert::202068.html Thanks for...

Part number: 80007040250

Hi, this is my first husaberg which is ah 04 FE 550, can anyone tell me where I can get a blue seat cover or gripper material as close to the original blue as possibly, thanks

Hi! Is the transmission/cluch cover on the 550 -03 interchangable with the one from a 450 -06. The one on the 550 is in bad shape as the picture show. Only difference I can see is that the 450 has a separate cover just for the clutch that is removable. If not I guess i'll have to grind...

Hi, Took the 2 x covers off the lower joint/bearing. Bearing itself looks and feels good (no radial, lateral, or longitudinal play). But I damaged the two covers in the removal. Don't need the whole bearing replaced - just those two cover rings. Looked high and low, and can't find those...

Hi guys, I would need your help!! How could I remove the oil filter cover? I have removed both bolts marked as (1) in the image below, but what about the number (2), the center hole in the cover?? Please, help.... Best regards.

looking for water pump cover for 2014 FE 350...help