conversion

Just wrapped up the install. Everything went fine, and I'm very please with the outcome. I went with these guys Motorcross | Supermoto | Motocross Racing | Excel Motocross and they were great. The only thing, and it's one that pisses me off, is they don't list a phone number on their site, so...

just wondering if anyone has done a radiator conversion on a 650, from the single to a twin set up? any info would be great thanks

It seems that I have found a carburetor off a WR450 nearby. Ive been reading the owners doc for a while now but I would still like to get an accurate answer for what I have to do in order to fit this carburetor porperly. Im mean aside from the throttle and cable, things like jetting? Cheers, Tom

Hey everyone Iam in the process of adding a dual sport kit onto my old 97 fc510e. My hold up is what to use for brake light switches ? What do you guys normally use ? Thank you

Hi , Has anyone done this conversion and did you have any issues once it was done ..... I am not unhappy with the 250 but the 300 conversion kit is a very tempting prospect . Its a standard HuSABERG POWER PART and they say " bolts straight on mate " which may be the case but does it cause any...

I almost got a little carried away with out an intro...So this is my first post, been a proud owner of a flashy 11' fe570 big boy for not quite a year now! I've done all the updates and have basically taken a perfectly good 570 S and am 98% done with turning it into a Hare Scramble Machine! I'm...

I installed the Rekluse Pro clutch, and did the straight clutch to rear brake conversion by plumbing the clutch hose to the rear brake hose. It works great. I have a question about how to block off the clutch. I simply put a piece of tubing over the stock banjo bolt to cover the holes and...

Has anybody converted a FE450'10 into a FE570 engine ? If yes what componets would be required? Barrel, Piston rod etc.. Thanks

Hey, does someone has an idea if it's a good idea to replace the headlight bij a Xenon kit? I'm not sure if it's strong enough to withstand all the bumps and chocks you get in offroading. But I think it looks nice though. Anyone tried it out allready? :)

Ok let me start buy putting the products I used. I used the Xentec brand HID conversion kits you can get them on amazon or fleebay I like amazon cause at least your items will show up I bought 1 kits that came with H1 bulbs for my race tech light and since I only needed the one ballast I used...

Hi Guys, I own a 2008/Fe550 and now it´s time for a major rebuild. I`m thinking about reducing the displacement to 496ccm (As used by the Factory Riders some years ago) So here´s my questions: Is the conversion just an simply "plug and play" with a 501 sleeve (95mm) and 501 piston? Or is...

Has anyone fitted one of the many available HID headlight conversion kits to the OE headlight unit on one of the new 450/570FE's? The kits I've seen draw 35w, the same as the OE bulb so load shouldn't be a problem and having a battery onboard will give enough current for the initial startup...

Hello. Is there any kit to change from hydraulic clutch to wire operated? The bike is a FC 501 -00 Regards Jampe

Hi! I'm thinking about converting my FS650 to EFI and got a little bit stuck at one point ... I'm a bit unsure about the solution regarding the fuel pump. There are 2 ways which I would take into account ... 1. External pump An external inline pump just connected to the fuel tank on one side...

I Sparks Could you please tell me if is possible to convert one FC stator (only three wires) to the one that can charge batery ? Is it economical iteresting ? Thanks ZAGA

I recently acquired a 99 FE501 thats has a set of supermoto wheels mounted. The chain runs so close to the tire that the chain guard had to be removed, and there is evidence the chain occasionally interferes with the tire. Is there some fix that is missing? Should I simply be looking for a...

Hi everyone I'm thinking of buying a 450 or 550 fe in the very near future. can anyone tell me if the 550 can be converted to a 380? I know you can convert the 450. Is the 550 engine the same as the 450? ( exept for barrel size ) The reason i'm thinking of the 380 is because most of my...

does anyone know what racetech wp shock bladder conversion kit can be used in a 2005 husaberg fe 450e.the folks at racetech did not know.thanx,dan

Hi all, I have been working on and am in the process of coverting my FE400 to start using 12 4200mah sub c NiMh cells as used in radio controlled cars. They spin the motor nice an quick and it fires into life much better. My question to you is how many volts is it safe to put down the white...

Greetings all, This post has been a long time coming since my receiving of the Sparks rewound Kokusan stator. This started out to be a simple job, but, I ended up doing a bit of refreshing to other parts of the bike that delayed the posting of this thread. As many of the 2004 owners...