change

Hi everyone, Just got a 2011/12 fe570 and am wanting to change the oil. I went to crack into it but my 1/2 inch sockets and wrench won’t fit over the bolt between the frame. I’m tempted to use a ring spanner but then I won’t be able to torque them to spec when I’m done. What does everyone...

is it possible too use a keihin 3900a-drl on a husaberg fe650

Hi, Recently become an owner of a 2010 FX450 and the previous owner gave me a box of parts. I'm planning on doing an oil change. I have an oil filter, have oil screens, but my question is, do I need anything else (i.e. crush washer, o-rings, etc...)? Reason I ask, is while looking at the...

Three of my friends have Husaberg 570s. I have a 450 and want to change it into a 570 for my Snowbike. What parts do I need and can I buy them from a local dealer? Sorry I’m new to this forum stuff and to this Husaberg family. Maybe point me to other threads. Thanks Rusty403

Wondering if I will be able to fit as my '02 frame is not compliance plated. alooking for options.

Hello, Has anyone on here every replaced the Delo with a Mikuni? I have a BTS 33SS that I would like to try on the old 350. Just wondering if anyone had done this? Thanks, fedge

Well I guess the answer is one if they know how but I am writing this post since I cannot figure out how and cannot find the instructions on how to do it. I have a 2002 FE650 with the stock lighting. I am planning to replace the headlight with an LED. Sounds simple enough until I tried to...

Hi guys, a few quick questions......as far as I know there was an ignition change from SEM to KOKUSAN. 1. when did this change happen (Model Year)? 2. what benefits/advantages has the KOKUSAN? 3. can I install a KOKUSAN in an engine that was originally equipped with a SEM? Thanks in...

Hallo everybody, I would know if is possibile to chance Houston and cilynder from 390 to 570 in my 2012 bike and what the parts I need to chenge in electronics or mechanical. Thank you everybody, I' m from Italy and my English is not perfect. Arrivederci e grazie.

I just purchased an 03 fe400 and I want to change all of the fluids and filters. Is there a place where I can order all of these? I keep coming up with 09-12 kits.

Hello, In The passt we did 2 prototypes FS 650 with EFI. You can See it at our Homepage fp-Engineering.de At The Moment we make a FE 550 EFI with small ecu. If somebody is interrested we can make a small serie of it. Price about 1800€

Hi everyone, I am new to the forum so hopefully i post this in the correct place. I have a Husaberg 650 fe 2003 that i did a oil and filter service on today. I got a little question. I drained the oil and replaced the oil filter, tipped the bike a little over to get all the oil out...

Hi! I was going to change the engine in my Husaberg 650 06 to an 03 engine. (do not ask why) Everything went great until I discovered that the ignition was quite different ... I have a ignition coil for both engines but can not figure out how to connect the wires to make it work. Do I need...

I have a 2009 FE570 and I cannot for the life of me figure out how to get a torque wrench or any ratchet for that matter on the drain bolt or filter screen bolt. Any ideas? Is it just me? They must have some low profile wrenches in the EU because that is a tight @ss fit!

Hello. I was just wondering, how often do I have to change piston on my fc600? I'm not using the bike on track, some dirt road and messing in the forest only. I know that the oils must be changed in every 5h and I assume the valves need to checked every 15th?

Hello, One week ago i bouhgt husaberg fc 600. I think its 1995y. Before my mods it was hard to start engine, when it start running moto doesnt want to go upper rpm, only shooting from the exhoust. I had to change timing chain, coz old one was very long. For now husaberg dont want to...

I have a 2011 FE 570S. It has WP Closed Cartridge. Had the suspension lowered about three years ago. Probably time to change the fork oil. Do I need to change oil in the closed cartridge, or can I just change oil in the sliding tube/ spring chamber. Thanks

I'm original owner 2011 FE570S, 3300 mi, 178 hours on original pump. Bike was built with the "corrected" injection pump. Came back from successful Colorado trip, changed oil, etc., washed bike, started it till warm and put it away. Getting ready to go back to Colorado, pushed the button...

What's up new here in the Husaberg world. Really thankful i found this forum since i've wanted a Supermoto bike for so long and don't regret getting a Husaberg. Just wondering, changing the battery for the first time in my Husaberg FE450 07 (supermoto) Is it smartest to remove it from the...

Hi all, Just managed to change my plug for the first time (was doing a valve check). I had tried this on the last valve check but quickly gave up due to frustration w/ tools I had :) I ended up buying the motion pro 14mm plug socket and wow it was so easy! 13mm socket on the end of the...