cap

hey, just changing the fork spring on an 09 450 and when removing the cap it left a brass threaded thing with a slot in it on top of the damping rod? upon trying to re thread it into the cap it come against the male part of the clicker and becomes a pig? any tips? and is it right that it...

Pretty good chance this has been brought up already.. The search engine failed to get me anywhere. I have the Forks off the bike, And the Tubes unscrewed from the Cap... The Nut that's held (inside the springs) is exposed. I understand that I need some kind of Pin wrench. I recall some one...

I modded the stock end cap today. I enlarged the opening just a little. I have 2 650s , one with the Akrapovic an other stock exhaust. It feels like the Akra give me at least a few HP more and the stocker feels a little restrictive compared. So I wanted to give the stock exhaust a little more...

is there a model year of ktm fuel caps that will fit my berg? i have a ktm dealer 5 minutes away so it makes it easyier thanks

I give up. I hav spent too many hours trying to make a workable mould for a carbon mx end cap to replace the enduro cap. I am now looking for a replacment mx end cap to either go straight in or another enduro cap that i can modify (i want to keep the original in case of noise issues come WOF...

I just got new LBBB (little blue bit of bling) in the form of an anodized oil cap. It says on the package "Install according to instructions" but there were no instructions. Now yes, it seems stupid simple, but when I unscrewed the stock plastic plug I realized that there is no rubber o-ring on...

Hey guys cleaning out the the garage and looking to sell some unused parts. This is a brand new Husaberg Billet 1/4 Turn Fuel Cap. Work on 09-11 Husaberg FE390, 450 & 570 bikes. What you see is what you get! Price is $40 shipped. Pay Pal preferred. Thanks!

Hi All, I am a new member (Sept. 10') and was considering a purchase of a new 2011 FE 570. I made that purchase a month ago thanks to the help from all the input in these forums. I couldn't be happier with this bike. I came off an 09' 690 Enduro and was initially concerned that the Berg' would...

I have had 09 berg 570 for 11 months, looking for info on the positives and negatives of removing the screw in end cap will I have to adjust FI Mapping to suit? Thanks

has anyone had a radiator cap fail ? I went for a ride the other day and it pumped coolant all over the motor and my boot. When I refilled it (just over the core ) the top of the radiator and cap were not red hot, it did the same with the coolant level ending up well below the core. It only...

I have never serviced forks myself before and the fork cap on my 01 fx 650 seems very tight, any tips on this or fork seal replacement would be appreciated. thanks.

Ok so I'm filling up my Berg at the gas station and left my beautiful Husaberg alum billet engraved gas cap on top of the seat and drove off! Dumb dumb dumb :cuss: Went back next day couldn't find it and station mgr. had no clue. Lucky I had a spare Acerbis cap from the stock tank and could...

Hi everyone, simple and basic question but............ Just replaced the standard fuel cap on 09 570 with the factory alloy cap and short breather hose. Wondering what I do with the grey nipple on the head stem that had the old standard breather hose from the standard plastic cap attached to it...

Greetings lads, How "fat" would you guys says a spark should be to be up to spec? It's a bit hard to put a size on a spark, I suppose, but please try! My spark is bright blue / white in colour, so that looks fine, but it's awfully thin. Another guy that looked at it also thinks it doesn't look...

I am trying to change fork oil wt. but cannot see how to remove the cap from the cartridge to remove the spring. Fork legs are off the bike. The caps have adjustable preload (pin spanner holes). This is on an 05 FS650E. Any help is appreciated. Donald

Does anyone have a part number for a plug cap, bike is a '95 600, plug is C8E. The current cap won't lock onto the plug at all. Actually would this one work? http://www.z1enterprises.com/detail.aspx?ID=426

Can you see the slits I put in there ? I think it works. I am going to clean up the slits and open them up just a little bit more. I also repacked my clutch with a little bit of dog hair, that seems to be working too.

After of totaly 75 engine hours,I notice that clutch didnt work fine last time I use the bike.With wheels on air,rear wheel moved strong when I put 1st gear and the clutch lever was pushed to the bar.I new that was about time to change the clutch liner discs,so I disassemble the presure plate...

just had a fantastic day on my berg when i encountered a problem with the starting of the bike it was just turning over when i noticed a fuel leak from the right hand side from the fuel lines fuel was under extreme pressure and squeezing by the clip so i un done the fuel filler cap and the...

are these available for bergs up to 2008, i've seen them on 09 model bikes (bmw450) and reckon they look heaps better than plain alloy