camshaft

Does anyone have the specs for the older 96 or so camshafts? I building an older Berg out of some salvage bikes that I have. Need to know about the difference between the A and B and C cams and in which models they were used in. Saving my $ for a newer Kvarnaberg.

I have a new one coming for my Fe570 Is there a way of doing it without splitting the cam' chain? Has anyone done this, any special tools I need or advise worth having.

I'm seeking for a HOT camshaft for supermoto competition. What is the best camshaft around for medium-high rev power.

My 03 FE400e started making a strange sound and losing power on my ride home. I had about 12 miles to go and it made it. I took off the valve cover an the bearing on the right end of the cam, 360 000-01, has come apart. The outer race is there, but the balls are gone. I assume they would have...

Hi All, I tried to get the head off my 06FE550 over the weekend and in a senior moment tried undoing the sprocket from the camshaft to endeavor to get the cam chain off without cutting it, I have since been told by the dealer I have to replace the camchain even though it has only done 35 hours...

Hi all, I need to replace the cam on my 2004 FS650 motard as it is very pitted. The cam that has come out of the bike is a 08 3/3205. The engine is completely standard, and runs the full Ti Akro exhaust. The bike is used for race/street use and I like the power delivery it makes. My question...

I just installed a new "08" camshaft in my 2002 FC550. It originally had a "53" camshaft in it. I compared the two very carefully before installing and noticed that the 08 cam was about 1.5mm shorter in overall length than the 53 cam. I installed the cam against the right side of the engine...

Hi, I´m searching for the measure of a Fe550 2006 camshaft. Need the measure from the middle of one lob to the both offset for the roller bearings. (inner measure between roller bearings an middle of lob) Have a second camshaft which is 1,5 mm longer than the original issue unfortunatly I...

Hello, Does anbody know where i can order a new camshaft, part no. 82036010000 (camshaft 650 04) on the web? My local dealer took a couple of months and hasn't received one yet so i decided to take my money and look for it elsewhere. I live in Romania, Bucharest, so i looked for some european...

I have a 1996 501 motor (96-240 scribed on head and valve cover), into which I want to fit an Auto de-compression Camshaft. I have a brand new Auto de-comp cam that I purchased with a bunch of new parts for a 1996 FE 350 motor, which is labelled (hand scribed/engraved with a motor tool) FCS M/C...

Hi, i saw this numbers in the tuning guide, what do they stand for ? i'm thinking of building my own tourge cam LRX2 = 272 / .407" / 107° /Martin

Hello, I purchased a 1994 501E Husaberg from a friend of mine and I was checking the valve lash and one of the feelers slid down the camshaft tunnel. After pulling valve cover and the clutch cover off I found it. While inspecting the internals I noticed the wear on the alloy camshaft sprocket...

I'm replacing the timing chain on my 02 FE501 and I'm alittle confused as to were the cam lobes should be at TDC while hooking up the new chain. I've seen some cases where people have said to have the lobes facing up at 11 and 1 o'clock. I've also heard people say that the lobes should be facing...

Last Sunday my bike was having a problem starting. Felt like the battery was dying or not getting a good charge. The bike has 15.5 hours on it. I opened it up to do the 15 hour service and found the problem; the auto-decompression weight was broken. Strange...now to see how good their warranty...

Hi, I am going to buy a new camshaft.Anyone knows where or from whom I can obtain LX2 and around how much it does cost?

My camshaft cover cap worked it self out as far as it can go. When I found it is was backed up to the radiator hose. Is this typical? Can I just clean it, oil it and push it back in? Or is there something else going on here?

I did some internet searches and saw that Webcam and Megacycle list cams for Husabergs. Has anyone tried one and if so how were the results?

ok so my bike mechanic sets about changing the seals on my waterpump on my 96 fe600 then he calls me to tell me that the camshaft has grooves on it & that is the problem & he couldn't say if it would still leak or not he put it back together cos i needed the bike for an enduro meeting today & it...

Please has anyone got any info. I have a 2003 FE650E and the bikes electric starting had progressively become worse until it would only kick. After fitting a new high crank battery etc i decided to inspect the auto decomp device. It looked worn so i decided to change it. After changing it...

Hi, Have someone sorted out the camshaft options for a Husaberg 01-03 model or any model? The characteristics and which fit on which bike. Do all KTM camshafts fit on a Husaberg? Are there other nice camshafts outside the KTM company and where do you find them if so? I have seen some...