cam

I believe my 2006 Husaberg fe550e is about due for a new cam chain. I checked the ratcheting adjuster, and it's almost all the way out. I have a new chain in my cart at Taffey's (100788 - R80036013000 R80036013100 IWIS Cam Chain with split link- 66 Link - 501; 2004 & 550 models 2004-2008)...

Hello I'm just collecting some road and track cams in the USA. if any American (and canadian I guess) wants a cam I can do it for £50/$60 off if ity doesn't leave the USA and come back to you again! It's the same cam we used in the 112bhp engine so you know it is the business! let...

Have any of you a duff cam from 1997-2008. I'm sure many do? Just looking to build back up on some host cams and get them sent to Webcam Inc. I'll happily pay $25 for an old cam. I hope someone has one or two! regards Taffy

I am getting my bike all back together after getting most of my parts from taffmeisters. While following the install instructions for the cam chain I am having a lot of trouble with the chain being a mm or two too short when trying to get the quick link on... I'm using the chain that Taffy sells...

Hey all. I have a 2009 Husaberg FE570 with 13000 miles and 440 hours. No top end work as far as I know (or anything deeper). I’m in the middle of assessing some things. Leak down test was about 8%. Could be a good thing. The rockers looks worn. And the cam has some shininess in a vertical...

Hi, I have FE450 2011 300+ hours on engine and my timing chain is rattling like this i guess. I want to ask. If I will change timing chain for a new one, is it ok? Or I will need to change timing chain and timing chain tensioner? I dont like manual cam chain tensioner. Dirt trics cant...

husaberg 400 cam tree bearings carry protective covers or balls are the view to have lubrication already bought the bike with these bearings

Hi i opened today to check my timing position of cam but no sign on or something to be sure for timing corect any ideas Expert people :)

Hi for sale cam what i don't need it

Hi Please look at the attached photo after reading below. Background: I had the bike apart forever after breaking an exhaust pivot arm. When I put it back together I think I either did not set the auto decomp spring correctly or it is broken. With engine off the spring should always keep the...

Hello to everyone,how its going?hard with this lockdowns with this virus but what we can do,i hope the best to everyone,one question again just for the second cam what i have spear from the first owner what he give me extra parts its this number on 23/02 01 do we know what is from what...

Hi just question if someone know what type of cams is this the person what give me the motorbike give me a lot of extra parts what if is not similar with mine i will need to sale them

Edit: Got my answer from Taffmeister re: the cam wear. But I'll leave all this up just in case. He stated it's fine to use. After some disassembling I discovered I had a broken intake valve (right if sitting on bike) and a beat up shim laying in the head. But no other damage so far including...

so, i took part the engine without checking for timing marks on the crank gear and the balancer shaft gear. i've tried a couple of combinations with no success. crank at TDC, balancer at BDC, cam sprocket marks horizontal. 3/4 of a rev and the piston touches the valves.

Trying to do the updated dutch clog on my '99 and need the steel gear to go with it! Hope to find one inside of the US. Thanks, Chad

Hi all, I have read through few posts but not found what I'm after.. I have a 01 650 engine, full rebuild is in the finishing stages. I have a Ali cam sprocket in good condition. New iwis chain, new modified 04-08 cct blade, and original cct. When I install my blade, then install my...

Believe it or not.

This bike followed me home a few weeks ago. The engine was partially disassembled and there's no way of knowing why. Bit of a sad story, too, as the original owner lost his life in a vehicle accident in 2011. The bike was given to a friend of the deceased as he hoped to get it fixed and...

Hi everyone! I have an Husaberg FS 570 2011 and hope you guys can help me either calm down or find out what's wrong. I'm using the bike daily to and from work and in recent days I have noticed a strange "noise" in the engine, especially when the engine is cold and at deceleration. In my...

So looks like DJH doesnt offer a cam chain tensioner for the bikes earlier than 09'. Id like to install one on my 08'FE450 then transfer it to my 07'FS650 when that engine is built. Is there another out there comparible ? I like the fact its fully mechanical & not relying on oil pressure...