broken

Just changed my cam chain. Three hours running. Went to a local enduro today. 3km in to the first timed section, the bike quit. Damage, one broken cam chain, two bent exhaust valves and the tensioner bolt got bent and cracked the head where the bolt goes through. The cam chain broke but not on...

hi i have two broken ignition coils to a FS650 husa . 2002 broke two weeks apart and I do not know why . but I have a friend who is an electronics mechanic and he thinks he can make them if I get a diagram so he can see what the different parts are called . is there anyone who has the diagram ...

The day started very well. Beautiful weather, autumn, warm. Decided to ride near St. Petersburg. Went away into the forest, where there are no people and machines. As usual, on a flat road, my son too much pushed the front brake that it drifted and he fell. Get up, he could not...

I just picked up a 2011 FE 570. She is a pretty bad *** machine if I do say so myself. I also picked up some gear including tech 7 boots some pants helmet check protector gloves. I have been riding bike for 15 years but this is my first dirt bike. I have been wanting to get into something...

Hello there everybody, I picked up a FE400 2001 for next to nothing. Theres some problems I hope you all can help me with. First it won't start off the button, the stater turns over but just won't fire up. Second when the bikes hot it cuts out an you have to wait for it to cool down can take...

I went to change the clutch on my 02 650, all was going well, until i put it back together, first thing i noticed was that the clutch felt like it was stuck, it wasn't doing anything at all, just had a solid pressure to it, so i removed the engine cover once again and re-did it all, I tried the...

Several months ago I posted about my 98 FE400e locking up with a THUNK. I haven't had the time to dive into it until this past weekend. Here's what I found: One of the intake valve adjustment bolts broke. I found the end that pushes the valve, but the bolt is just plain gone. I've pulled...

I just bought a Husaberg FE 650 2003. And Some teeth are broken on the clutch hub. And two theeth on the free wheel inner sprocket. (And the kickstart shaft is broken) What KTM parts fits? And should i just buy a slipperclutch?

My 09 FE450, with 400 hours and 8000 miles, has broken. Stone reliable to this point. Engine runs fine. Transmission shifts fine. all gears, but no output. sounds like 2 gears running over each other without engagement. I can hear the teeth spinning across each other. Happened yesterday while...

Has anyone seen or heard of the oil drain plug magnet breaking in half or being grinded in half by something in gear box? First time changing oil on my new to me 2009 fe570 @ 34hrs found the oil drain plug magnet sheared by as much as 7mm off!! Not much metal shavings stuck to it. Some shavings...

Hi, The inevitable happened :( My timing chain on my '07 Fe 550e broke and wedged in somewhere ...I will not disclose how it happend :oops: It has 8000km on and 190 hours. I'm replacing it but would like to know from someone who did it before, if there is an easy way of doing it. I will...

I am selling my CBR 600 to buy a Husaberg FE501 2003. The owner says that the el-start is broken and needs to be replaced. I am just wondering where I can buy a new one and approximately how much it will cost me? I also need a new piston and sprockets, but I found them here...

I hope.. 05' 650.. 230 hours I was ridin along kinda easy, going through the gears when at about 5-6k revs it quit accelerating. Thought I was out of fuel at first, but ruled that out as it kept running. Running crappy with barely enough power to hold 40 mph. It turns over with the...

Hey guys. I was lucky enough to have my clutch line brake on me on top of black bear pass in Colorado (and from the dumbest fall ever), so here I am looking to replace my clutch line. Will I need anything beside the following to get the job done: 1.Bleeder syringe ( I'll try and use a $3...

The engine started to make new sounds today so I took of the clutch cover to check if the crank nut was loose again. The nut was ok this time but there is one tooth missing on the clutch basket. Is this a normal problem? And WHY does this happen? Will one missing tooth make a loud noise? Or is...

Lately my bike started to be knocking noisy under load so i decided to look in the head and under left engine cover. And i found that i have broken to half two teeth on the upper timing gear and traces on crank drivegear :cry: , all other gears (basket ect.) look fine. In oil was only some...

When 1st trying to diagnose this I had posted in FUEL Postby DAY51 » June 13th, 2010, 6:52 pm Thanks for taking me in the right direction birdwoodburg. Just opened the valve covers to find a broken left outer exhaust spring. Can the spring be replaced by putting the cylinder under air...

Snapped the plastic foot off the bottom of the sidestand (2009 fe450) Can one get the replacement tip only. Does anyone make aluminum ones instead of plastic

On my buddies 2010 Husaberg FE450 we had a problem that the bike would only run in high RPM. We found a cracked TPS sensor on the outer shell I dont have a clue how a TPS could crack since its in a very protected place. This bike had never been without its tank before, any ideas Thanks

Finaly decided to have another go at the old girl (2005 fs 650 e)puled the valve covers off intake side ok then the exhaust first one ok Hmmm other one feels loose. Bugger should be tight this one has 3-4mm play in it think its broken. Not very happy seems the motor has done 8 hours and about...