bearings

husaberg 400 cam tree bearings carry protective covers or balls are the view to have lubrication already bought the bike with these bearings

Hi everyone, I wanted to take advantage of the cold months to repaint the wheels of my husaberg. I would like to take everything apart to be able to sandblast and powder coat. My bearings and wheel dust boots are in good condition. Is there the possibility of disassembling them without damaging...

Does anyone know what bearings and seals to use for swing arm in a FE400 96 and FC600 99? I have been trying to look in older threads without success.

Can anyone check my bearings selection for husaberg? Is it better to use ball-bearing (TMB 206 JR2 C3 KTM 0625060206) instead of roller bearing on left side? All bearings are from NTN, but one of them is too expensive (NJ205), so I would change it for ***. Are *** berings reliable or should I...

Hi, I'm looking for new camshaft bearings for my FS650e 05. What is a good choise? Thanks

Is this the correct way to install the ntn bearing? The side with the lip on facing the crankshaft?

Having learned of the shortfalls for the 01 550 top end I started with the roller rockers. There seems to be two types installed. Don't know which of two prior owners may have upgraded or replaced when failed the roller bearings. Please chime in and share what you identify. The issue being...

Well my 99 FC600 started making a whine in the topend last weekend. Changed the oil today and had a lot of small metal particles in the oil. Pulled the cover off the head and one of my rocker arm rollers was shot, ate up the side of the cam lobe which appears to be where the metal in the oil...

Hi, My balancer shaft bearing spitted out the balls and made a mess around in the crankcase. I have no splitted the case and cleaned everything up and looking for which parts to buy. I obvious need new balancer shaft bearing and new crank bearings. I have read around here but got unsure...

I took my bike for a service and they said the front wheel bearings need doing, so I'm going to do them myself. What are good front wheel bearings for a FE 450 2013? I've read not to go the all balls wheel bearings as they are not good quality and are likely to be needing replacement not long...

Has anyone had to replace the bearings on a older FE like mine, and if so did they keep the replacement bearing sizes? I need to replace everything, swing arm, steering head, both wheel hubs. I have the front hub bearing PN#. fedge.

Hi! I have pressed in new bearings on the camshaft on my 650 Berg. I read somewhere in the manual that the bearing should be pressed in so you just got a little clearance between the bearing and the auto decomp device. But I cant find any information on how far pressed in the other bearing...

Having to change steering bearings due to them being notchy, drop the yokes out today and bottom bearings rusty. After a lot of f..kin about I got the bottom bearing off, there is a washer under the bottom bearing. Having checked the All Balls kit I have there is no washer just bearings, cups...

hi. I want to change the crankshaft bearings at my fs 650 but they are too expensive. 130 euro two bearings by ktm. I am looking for SKF or KOYO but i dont know dimensions to call a dealer for price. do anyone knows dimension for crankshaft bearings or code? i want to change and the...

I have a 2005 FS650E and need some parts came to local KTM AND THEY CANT LOOK IT UP !! Does any one have any part numbers or anything to help me with this ??

does anyone know about the FAG6206c4 bearing for a 98 fc 501, the spec. seem to be better than the NTN bearings.

anyone have any thoughts on ceramic bearings for motors , wheels. I know they cost 3 times more ?

Can anyone tell me what swing arm bearings come in my old 94 FE501? I'd like to buy them before pulling it apart. Thanks.

I'm replacing my 2010 FX450 big end & main crankcase bearings. The manual says to heat the crankcase halves in an oven to 150 degrees C (302 degrees F) and the bearings will fall out. I don't really want to replace transmission or balance shaft bearings as well. Will heating them to this...

Hi Guys Would anyone care to speculate why they changed the simple Bush and Needle Roller setup to the new style, with the caps on the end of the bush in 2005? Pro's & cons? I've had a look at my '03 501, '02 470, and '04 650, and I can't say that I've noticed any strange-ness relating to...