600

Hey guys I own a 1996 husaberg FE 600 and I’m missing a starter gear some where between the starter motor and the crank, is there anyone out there with an exploded diagram of the engine so I can see what gear I’m missing Thanx guys

How is the timing gear to be installed because I do not remember anymore - it can be put on each side, I assumed that by putting on the upper sprocket and pressing it at 80Nm, it presses the one underneath and I gave it a distance from the side of the second sprocket

Does anyone know whether the shaft nut on the clutch side can be bought somewhere or do you need to buy the original?

hello I'm looking for a connecting rod for my husaberg

hello everyone, I have a question if it is possible to fit a kickstarter from another husqvarna motorcycle, ktm 520, lc4 or other, I mean the kickstarter itself, not the shaft, the motorcycle is a Husaberg Fc 600 2000

Hi everyone, I have a problem with my husaberg, the point is that there is a problem with the 4th gear as I go, sometimes it jumps in this gear and I wonder if it's a problem with the clutch or the gearbox? , I will add that when I put the engine together, I did not give the washer that was in...

I have a 00 husaberg, last year of the old 4 speed gearbox engine I want to know what the advantages and disadvantages of these motors are compared to the newer design another thing I have a problem with the 4th gear, sometimes it skips or the parts for the box are available somewhere?

Hello, I just bought a 1999 Fe 600 e The bike is very hard to start. The starter is not currently working. I can get it started about every five tries, each try taking about 5 min. I talked to a ktm mechanic that said the early fe 600s have a problem with the starter failing and the parts...

I want se the interest in an Worn out bike. I had it for 10 years. It has been working fine until the oilfiller- cap broke and shooted out oil. Now its not possible to out the gears in, No Crunsh noice from the engine. It is possible to still start it and get the engine running. I just want...

Friend of mine has an FE600 engine that will need a rebuild. He is short, and struggles with starting and the power of the 600 as a daily rider. Is it possible to swap parts and turn the 600 into a 501 or 400? Just wondering if its possible or not.

Hey I bought a Husaberg FE 600 1996 with only kickstart last weekend. According to the seller, it was sitting inside for a couple of years. The problem now is, the lights aren't working. No high beam, no low beam, no brake light... Motor starts with 1-2 kicks and runs perfectly smooth...

Hello, I recently purchased a fe 600 which has a rebuilt engine but it wont spark. Last owner said he was able to get weak spark but now im not getting any. It has unknown aftermarket stator and replacement cd5006d cdi/coil box. The cdi looks to be in good condition from outside but I can't...

****!! got a accident on my bike last night, fairing broken off. Any one bought the Chinese aftermarket fairing? How is the quality and fitment?

Hello guys, anyone interested in buying parts/ whole motorcycle? It's Husaberg FC/FE 600 with e starter 99Y. If you have any question, message me. I'm going to start the engine in the next weeks then bike will be part out. Bike is located in Poland/Jelenia Góra but shipment in whole europe is...

Ok, after taking it down to the frame here is what I discovered. Swing arm bearings looked brand new and were still packed with grease, ditto wheel bearings and fork stem bearings. Bottom of frame has no scrapes or dents. Shift lever still has most of the original paint on it. Valves were in...

Hi All, First post so be gentle.....lol Apart from riding and tinkering, my other pastime is light Engineering work ie Turning and Milling. I was recently give the task of resurrecting a badly bruised front axle from a 1999 FE 600. This axle came to me with a Bearing (6302) firmly...

hi I bought a Husaberga FC 600 from 1998 the problem is that I do not want to fire no spark guilty I was a stator I bought a stator I bought but I still do not want to pay sometimes I shoot at the carburetor I do not know if the previous owner founded a good stator and a good magnetic wheel, no...

Looking for a 97-99 501 or 600 motocross preferably in the uk Would consider a bike in bits ! What have you got ?

Hi i have a problem to change gear to 2-> 3. The lever is so stiff i cant use leg, i have to use hand instead. Where should i look for the problem? Do i need to open whole motor? :eek: Ps. Sry for the bad English. Thanks for the answers! Kalle

does somebody know what cam came in the 99 fx 600?