550

Rekluss, Scotts steering damper and rear disc guard, BRP chain guard, 300+ hrs, all original, $3,000.00

Hi folks, Read a bit in older threads, but neither wanting to necropost or clutter the other clutch basket thread, here's the issue. Like a few of yours, my bike has the starter spine/whine issue. Roughly half the times I hit the estart. I could live with it, but now that I'm elbows deep...

Hi, Came back from a trail ride and noticed the upper roller that is sandwiched between the frame and battery basket is missing. No worries, check the manual .... can't find the part on the pages for either battery basket or frame parts. The drawing doesn't show it. There's a part...

Hello everyone, David here from Auckland, New Zealand. I've been lurking on the forum for a little while now and have come across plenty of really useful information along the way so first thing's first, thanks to all the contributors out there! Earlier this year I picked up a very tidy...

any one have a Rear Wheel Hub Axle Bolt Nut Chain Stay 80010085044 they want to part with ...sure it fits other years as well ..mine is kinda toast

I got the Behr Cush rear wheel on the 07 550. Barely. The tire is an Avon trail rider 160/60/17 but was at least 5mm wider than the Michelin Pilot Power on my 650. That left me after offset with just 1 or 2mm on the left and about 5mm on the right. I have room for a slight shift to the right if...

Hey guys, I'm looking for a right side header pipe for a 2008 FE550 in good shape and no dents. let me know what you have! Best, Greg

Had a great day at the ice today! Three bergs today, a 550, my 570 and a 650 :)

Hey guys I can't import a Husaberg into Canada from the US so here guys have at it if not too expensive for you and if you want the nicest Berg ever. Advertised in bike find, it's in WV, **** my loss is your gain. Unless someone has idea of how I could get it in the country. I don't have time to...

I've bought myself a lovely 05 FC 550 4 speed in what appears to be lovely original condition and was wondering who else out there owns one or has owned one

Hi all, I've been searching the forum a bit but I want a bit more clarity. As title says I have a 550FE 2005 which on last ride the starter just died. It semmed to be the battery at first because the starter kinda slowly died (getting weaker). So what I tried was following: - Charged battery -...

Thought i may have a cooling system problem when i got my 650 but just realized that the exhaust gets alot hotter thrn my 550 who else has experienced this?

Quick question, the Sprague should free wheel in counter clockwise position when looking at it on bike? What is the best way to peen the timing chain link? Thanks

Here we go on a top end refresh. Got timing chain,valve seals, double springs, cam follower bearings. Have everything apart and am thinking about starter problems. Will spin but disengage. Works, but since I have everything off now what is problem? Sprague?torque limiter? Thanks for advice.

Hi husaberg world, need some advise on jetting a 07fe 550. Ride mainly around sea level with temps around 50-60 degrees. Bike has a 48 pilot, 180 main and 85 aj. The bike would start with no choke for awhile, then wouldn't start warm. Would kick start though. Took carb off and found the air fuel...

Before I start this thing up and go for a break in run on my fresh rebuild. I'd like to know what the rev limiter is set at, so I can try to avoid hitting it. I can't find a single mention of it in the manual, and can't find any info online about it either.

Heya, I often find myself idly speculating whether a 570 crank (and rod and piston) could be made to fit 550 cases somehow. Probably not! But what are your thoughts on the matter? The 570 stroke is 2mm longer. I should look up rod and piston height too. How much height can you add to...

Hi guys I have a FE 550 2007, the previous owner exclusively ran it on belray thumper 15-50W here in hot Australia. Will this Castrol Activ 4T be fine? Belray Thumper is ridiculously expensive at $25 a litre and I feel as though I need a little more than a litre as I change my oil filter...

Ok, I bought this bike for quite cheap last year. It still ran, but was loud. Main bearing on flywheel side had gave up, which also made the piston eat the liner. The conrod, appears to be fine, and I feel comfortable putting it back together. My question is, the crank... I finally...

Hi Guys, very new to the berg world, in fact am still yet to own one, that's where you guys come in. Am looking at an 08 FE550, but don't know too much about them. Are there any common problem areas or things that I should look at before buying? what is the part availability in Victoria...