501

Hi ;) I've recently took my 2002 fe 501 apart to check everything, engine is off the frame i'm going to take it apart probably tomorrow . Bike has 3500km on the counter(?), it was in some guys garage standing for 4 years thats for sure . I've done some searching and not sure what mods are...

New to Husaberg, but my son has an 2000 FC 501. Where can you find parts?

Hi guys I need your help. I had my top timming sprocket badly damaged in by engine so I have bought a used one to fit in my engine. But... this one is from another model (do not know which) but the outher shape and qty of tooths is same. The only issue is the inner diameter - I need...

Ive looked through a few posts and cant make heads or tails of it. Im hoping some clever sod will know what im doing wrong. I have a 2003 'berg 501. Its a struggle to start, took me 3 hours of fettling to start it yesterday and it was fine. Would start on the button without issue. Went out...

I've wanted a Husaberg for years...bought a 501 installed new lt tembersled..found a 570 added mapping switch and moved timbersled kit to 570..love the power of 570...played in two ft of new snow Saturday...The short track 450s didn't have a chance at keeping up with me. Now I think I have a...

Hello all, made an account on this site after reading everything I could find about the '96 Husaberg 501 fc and fe. I have the opportunity to purchase one (I'm unsure if its FC or FE :eek:) from a friend for only $500. It has been sitting for years (4-6 years about) so I understand I would have...

racing camshaft for fe 501 1999 for sale:onfire:

What is the difference in size of the a b and c pistons. I need a new piston due to a worn wrist pin. Bore is clean, no damage, looks to have about .0005"/.012mm wear in the fwd to aft axis of the cylinder. Well within limits. I need a 92mm piston, however, not sure which one. What is the...

I would like to replace the "O" ring at the sliding rod(clutch). How can I replace it?

Hello recently picked up a 94 husaburg fe501 needs trans gears and a rebuild got the bike apart put it back together to make sure it was all there have a couple parts that I couldn't figure out where they went so I'm looking for a repair manual for the motor so I can figure out where these parts...

Where should I start. Went riding about a month ago. Went to start my bike a week ago wont start figured it was the plug. Now I find out there is no spark. I want to go riding Tuesday! I'm pissed right now. All wires are connected.

The short of it is the bike died mid ride and wouldn't restart. Luckily I was at the top of an 8 km hill near the campground I was staying at. I tried kick starting it and bump starting it in 3rd and 4th and go nothing. From what I can tell I've got a bad stator. I've tested the black and red...

Hello all, my brother was nice enough to give me a slightly rough 2003 501FE. The bike has sat for about a year and needs some attention. I knew very little about Husabergs so have spent some time on this site to get up to speed. [Great site, by the way]. This leaves me with some questions...

Thinking of parting out the bike to get more money out of it. First thing to go is the engine. Then i will sell the rest of the stuff. The engine has 188 hours on it. Engine was rebuild at 150hours by previous owner with new crank bearings, piston etc. At 175 hours i rebuild the cylinderhead...

My husabergs rockerarm rollers said kaput and i need newones.. i asked these from reseller but they couldnt order them from importer. Do you know where i can get these?:unsure:

Hello, I recently bought a 2000 FE 501. It was kind of an impulse buy. I haven't had a bike in years (I'm 28) alwAys rode 2strokes and I seen this bike for sale for $1300; figured I couldn't go wrong and bought it:cool: so I got home and it seems there are a lot of haters out there trashing...

Hi there guys, I am looking at heavier springs in the front and rear of the bike. I have just noticed I have a rear straight rate spring from a 2004 berg sitting here which is a WP 81-99/260. This 2004 berg spring is 10mm longer than the KTMs or the new berg 2014 spring. There appears...

Hi its my first time on this forum. I own a 2001 Husaberg fe501 which I have had for 10 years. I recently dusted the old girl off and decided to start riding again. The problem is that its very hard to start. The button was never great so I havent worried about that but it always kicked over...

Hello, I am looking for the complete auto-decomp mechanism for the head of my 91 501. I also need the cable from kick starter to head. Anyone have one or know what other models mechanism would fit? Thanks

i have a 1995 husaberg 501 and i broke the clutch cable and cant seem to find one does anyone know where i can get one or if there is another model cable that will fit. dbrmendomain@yahoo if you know could you drop me a e-mail.