501

Follow on from Metal bits post. Removed the cam tensioner and it is all the way out, removed the plastic bit and that looks to be perfect / new ?? Is the cam chain streched? how much play should it have? Cheers Mike.

On oil change there was a lot of filings + blue plastic in the mesh filter, having removed the clutch side cover I found that a tooth from the cam gear was missing, found it lying in the bottom of the casing. Question is are all the fliings from this or do I have other problems? I can only post...

SPECIAL PRICING - $11,399.95 - AT RENO KTM - NEVADA MOTORCYCLE SPECIALTIES ...CUSTOM MODIFIED NEW 2013 FE 501 HUSABERG - YOU SAVE $903.86! CALL 775-358-4388 FOR MORE INFO.

Hi guy's , new to this forum but you might have seen me on other forums recently purchased my first berg 501fe a months ago building it up for rally raid , :cheers: I have sourced a front acerbis 20ltr tank but was looking for a rear subframe tank or similar , I have seen the safari rear...

hello fellow riders, i recently got a brand new 570 after following advice from this forum. I absolutely love it. Now my brother wants to buy one, but 570 are all out of stock. The only 70 degree Husaberg engine left is a 2010 450? So we'are left with two options. It's either brand new 2010...

hey , i have a 98 fc 501 with a cracked gas tank. haveing trouble finding another one, will any other years tank/shroud fit?? early 2000"s maybe? does anyone make an aftermarket one? thanks, zar

Sometimes when I shift I get stuck in between the gears as in being in a neutral gearing. What could cause this?

Hello everyone, im a bit new at this so any help or tips woulf be much aprriciated! i wanted a husaberg for a long time now, and now its a good time for me to get one, so i went to my local dealer. He still has some stock 570 and the 2013 501. i've read excellent reviews on both bikes so im...

i broke my flywheel rebuilding my 501 after it was stolen and trashed. now im up the creek without a paddle cause i cant find one anywhere. my luck has to change soon.

i have got a 1997 501 kick start only engine fitted in an eltric start frame i took the swing arm out recently to re place the bearings i noticed that the engine case had broken behined the swing arm pivot bolt is this a common problem, as apart from the pivot bolt and the bolt under the engine...

Hey guys, I picked up a sudco FCR41 Carb kit for my 99 501. Hoping to put it on this weekend. I was wondering if anyone had some jetting recommendations? this is the non MX model carn. Just the regular FCR. I need to pull it open once it gets here and see how its jetted already but. basically...

My 98 fc 501 has been running an starting fine it's a kick only normally I can get it on the first kick or so but today I had to kick the liven crap out of it , it wasn't flooded would turn over for a sec then die this was after riding around town for a few did it 3 times today the air screw is...

Hi. I have little problem with jetting my carb. So i have main jet 175 Starter (choke) jet 65 Pilot jet 42 Main air jet - 200 Pilot air jet - 100 Bike starts bad, i use hot choke, turns with e-start 15 sometimes 20 when bike is hot. When is cold, start better, but not so good... yesterday i...

I have little problem... Today i use a lot of electric starter ( i use new FCR 41 and change jet's ) and now he's broke... Don't work. I mus take new, but i don't know what is name of electric starter. Know everyone what's name? Specification? To fe 400 can be from r6 or cbr 600, but to fe 501...

HELP!!! I took apart the clutch cover to put a new shift fork in. The kick start gear came out when I pulled the cover. I am not able to get the kick start gear to stop grinding on the case and it has no tension on the up stroke of the kick arm. I have the spring in the back side of shaft and...

I am turning my 501 into a sm an want to run 18s all around I like the onees I have seen like that but need to know what tire size I should go with ? This is all new to me the sm part

Hello out there I am hoping for a bit of help trying to get my Berg back up and running. I have had a hard starting issue that has progressed to the point that the starter is not engaging at all. I am in the process of replacing the battery with the beefier CTZ7S and I have a Yamaha R6 starter...

Hello I'm a new berg owner but not new to dirt bikes but this is my first 4 stroke an I love it but I bought it a month ago an the bike is like brand new it was not a street legal bike so I made it one an ride 40 miles a day for work an have noticed it uses oil it's runs like a striped assed ape...

Hi guys, my Husaberg 501 is not starting after doing the Valves .. have checked the stator and it lines up with the first line ok? could anyone give me a check list of things look at in order ?... my foot is about to fall off ... it sometimes starts for a little bit back fires a bit then dies...

[attachment=0:32dtn20e]20120728_191751.jpg[/attachment:32dtn20e]Hi Guys, I would like any and all info anyone might have on the electrics of a 1999 FE 501. I am trying to get it sorted for a rec reg setup so all i need is a head light,tail light and horn this picture is what im working...