501

Hi everyone, i just finished rebuild the engine, mounted on frame. I'm not getting spark at all. Changed spark with a new one but nothing. Tests: Stator resistance Red Black 3 Kohm Stator resistance Black green 160 Omh Spark cable resistance on pipe 9 Kohm VAC when kick...

I have an FE 501 electric start bike that has been sitting for 8 years. It broke down during a night ride and I parked it as some other bikes had arrived at the house. Now I'm trying to get it going again. I can not get any spark at all and I have been through the available material on the...

Hi everybody, long time no see, I unpacked the Berg after long time... I remembered from the last ride somewhen in 2019 that the swingarm bearings were worn out. Long Story short - swingarm out, axle out, bearing out, and under a thick clay crust I could find some needles... Sleeve...

I'm looking for a 1999 501 fly wheel rotor to put on a FC version. I ordered a stator from rmstator and the OD of the stator is 91mm while my rotor is 89mm. I heard of husaberg replacing these flywheels when you had to replace the stator. Any information or anyone that has one for sale...

Hi folks, I've bought a 2002 470,fitted with a 2004 501 engine, the camchain had snapped due to a nut falling down the camchain tunnel.. I bought the bike like this, so I've rebuilt it, but im not too sure about the valve timing, can anyone help? Cheers, shug. I managed to find a 2005 manual...

Hello everybody Sell ​​some parts of an FE 501 Bj. 199x I do not know exactly:D If someone is interested, just PM me

Hi guys, I own a Berg FE501 and due to parts getting less and less would like to start a thread containing parts we know are interchangeable. Please add any information you have on any parts you know of that will fit the 2013/2014 Husaberg FE501. So far this is what I've found elsewhere, and...

Hello husaberg fans. I sell my Husaberg 501 FE 1990, Frame number L 201. New Old Stock, never started. The price will be the same price as in 1990. No exchange. The bike is located in southwestern of France. Best regards

shock, forks, exhaust, extra springs all for $100 frame for $100 motor free with either (disassembled, bad crank)

Hey husa friends . Maybe any one knows where i can find the new conrod set for a preFL husaberg 501 ? taffy doesn't have . My conrod lenght ~124 Big end 30mm ,small end 20mm ...

Looking for a 97-99 501 or 600 motocross preferably in the uk Would consider a bike in bits ! What have you got ?

Anyone in the states looking for some 99 fc 501 body panels? I gas tank and shrouds, front and rear fenders, and side panels all in B+, A- condition. Also have a factory silencer in A, A+ condition. Thank you John

My name is John I have a Fc 501 in a Cannondale atv chassis, might seem a little off but I have high hopes for it. I am going to try to add some pictures if I can at some point. Thank you for adding me !!!

I believe this to be a 99 fc 501 has sem hi/ low igntion this engine is in a Cannondale atv chassis has new stator. Ohmed the stator 3k on red black 176.6 green and black I replaced plug wire and cap also no spark. I believe it has a failed coil/ cdi unit but can not find one Any help would be...

Hi guys a little advice if possible, Ive a little issue with a 97 501. Basically the gear selector shaft sheared off whilst out riding. Ive stripped it down and removed damaged shaft, no issues so far and replaced damaged parts. My issue lies with clutch basket, it doesnt want to sit far enough...

Привет всем. Вы мне сдесь много помогли с востоновлением моего берга. Есть ещё пара вопросов. Как правильно настраивать зажигание! И второй вопрос. У меня стоит dellorto ohm 40. Какие жеклеры поставить для 501? Заранее всем спасибо за помощь.

hello all, Im not new to bikes but im new to husaberg, I bought a project 501 with the wiring in a mess. Is anyone on here familiar with the bike 03 d 78078. The stator has been worked on because it is covered in some sort of paint. Does anyone in ireland or anywhere have a spare coil i could...

Hi guys my I need a new cylinder for my 1998 husaberg fe 501, I try to find one online and nothing if someone can tell me where to look it will be really aprreciate

Anyone have the rubber intake manifold or know where I can find one?

Looking for a rod a 97 501 FE. New.