501

Hello, I am new to husaburgs so I'm lost,, I got a 1997 fc501 on a trade with another bike and the guy said there was no spark and the stator was bad? He just probed and said he didn't really know what he was looking for, i haven't got around to testing it yet (i work from sun up to sun down)...

Good morning folks, my name is Max from Switzerland. I am quiet new on the Husaberg forum and a virgin in relation to Husaberg motorcycles. Last month I got a FE 501 from 1992 without engine. I got informed, that the engines from the early years are not very stable and very hard to get on...

Anybody got a link to an mx style wiring loom for a 2000 501? original loom has been butchered over the years, so trying to put an mx style loom on it. Happy to make it but need a wiring diagram to do it. Like to keep it simple, Want the electric leg to work and a simple start and stop button...

Hello, I bought bike in a box, would anyone have pictures how wiring harness is routed and what kind of mounts it has? Any pictures would be helpful! Thank you!!

Hello, intrested to buy good condition harness. Preferrably from USA, im located in FL Thanks!!

I finally got all my parts back from various places for my 2000 FC 501. I don't have a piston ring install tool. So I tried the following being very careful, but gave up right away before I had done any damage. Maybe I could have done it the opposite way, but that's not what I did. So I...

Wanting to sell my 2004 husaberg fe 501 it has a really high compression wich makes it hard to start runs fine when it has started tho I’m selling because I havnt got time to play about with it n find the problem I’ve put it up for 2000 but am open to offers ;)

So.. long time follower and reader.:o Engine Nr: 1054383 / 220067 1999-2003 Bike: YU7FC5K94Y0000165 I am changing piston on a 00 mod Husaberg 501. Timing chain was new when I bought it, so was planning on reuse it for season. This is the engine type where you don't have to split the engine to...

There is a barbed pipe coming out from the back of the head's intake port pointing down and to the left. The parts manual does not show what covers it. I put a piece of hose with a screw at the end to keep if vacuum tight. What is that port for? None of my manuals describe its use. If you do...

Wanted to buy: 1) decompression shaft, 2) decompression shaft's spring, 3) the cable arm lever (mounts on the compression shaft on the outside) 4) and the cable-end nipple retaining screw (this screws in on outside) All these parts reside above the clutch in the rear of the left engine...

Hi all, I have purchased a 2013 FE501 that I am setting up as a rally bike. I have kit in order from Rade Garage and intend to enter Greece rally this year, and then Morocco Desert Rally. I am now stripping down the engine for a full overhaul, and need a Workshop manual. Does anyone have a...

some guys I have the opportunity to buy a husaberg fe 501 2001 with a starter for 800 eur, but it is broken, the seller claims that with each trip it lost compression. How do you think it's worth getting into it? Did these engines have any common cylinder liner related faults?

Hi Please look at the attached photo after reading below. Background: I had the bike apart forever after breaking an exhaust pivot arm. When I put it back together I think I either did not set the auto decomp spring correctly or it is broken. With engine off the spring should always keep the...

I currently own the 2004 fe 501 berg but am thinking about trading for the 2013 I’m wandering what differences there are between the 2 as I can’t find any info anywhere any info will help thank you

Hi husaberg people i have speak with a friend in Athens what he have a lot of parts for husabergs if you looking for something just send a email,,,,[email protected]

Hi, I have recently bought a second hand Husaberg FE 501. Unfortunately it has a fuel leak when running. I have traced the origin of the leak to the topside of the throttle body. I did this by dismantling the bike to get the throttle body off then reconnecting the tank and blipping the...

old steering angle or new steeper one? delorto or FCR? which cam? any known weaknesses?

Hi guys just wondering how much my 2004 fe 501 berg is worth as I can’t find any others anywhere for sale

Hi guys I have just picked up a 02 fe 501 not running. Stator measures open cct on one coil so it's shot, while I'm waiting for the stator can I please get the low down on what parts definitely need updating to get this engine reliable? I have read counter balance, rockers, auto decomp, main...

Friend of mine has an FE600 engine that will need a rebuild. He is short, and struggles with starting and the power of the 600 as a daily rider. Is it possible to swap parts and turn the 600 into a 501 or 400? Just wondering if its possible or not.