450

Hi everybody, I hava stupid question :eek: : I recently bought a used FE 450 (MY 2012) and I am not quite sure how to check the oil level as I have a round oil glass but In the manual is only the oval one mentioned. :eek: - So how high should the oil level be in the glass? - And do...

Looking to buy a good used 04-05 Husaberg fc/fe 450 CDI. PN 80039031000 My email is [email protected] PH 541-531-8868 I am in PST Thanks!

Up for sale my Husaberg FE 450 2003 , Berg has a full fresh rebuilt engine done , works great , all there , FCR 39 , Akrapovic exhaust , plastics off 06 , wheels etc.......needs nothing ready to ride. 2200 GBP + transportation fees ( can...

Hello guys, Im 33 years old and live in the northern part of Sweden. Just started with Enduro training, so I bought a FE 450 as a first bike. It was fitted with a Rekluse clutch and had around 200 hrs on it with a good service record. Now spent around 20hrs on it and starting to get a pretty...

Just picked up a 2010 FX 450. I can't wait to get some miles on it

G'day all, I have a FX450 '10 that I'm using for motard around local tracks. I have been running the Vortex ECU, straight through muffler and cut back the seat to derestrict the air filter. This has really livened up the 450, but, a mates stock FC450 Husky (around '13) has the edge on...

Hi there, I know that is quite difficult to find for an oversized tank for my 450 07 berg but just in case you have one left in the back of the garage. I am looking for a 4 gallon tank or even higher. I have contacted to IMS, Clarke and Safari companies but no luck. Thank you so much...

Hi guys, I'm a newbie from Melbourne and was wondering if any one had converted a fe550 back to a 450and what's​ involved, any help would be appreciated Thanks Raf

In need of timing chain, tensioner, slides,valves, valve seats, gaskets, etc. To rebuild my bike. I haven't been able to find any place to get parts to repair the timing chain that broke on my bike. If anyone has the knowledge of where to get parts please let me know. This is considered a rare...

Can anybody give me the proper specs for intake and exhaust on a 2008 fe 450e

Hi all, Now i'm not old, just outstandingly lazy. My berg, an '04 FC 450, kicks over just beautifully. Two or three when cold, every time when hot but I'd love an e-start. Nothing better than 'There's a button for that'. Plus, i'm pretty fed up with the left kick as I ride an XR every other...

hey guys doing a rebuild I ordered new rings that are 100mm,upon tearing it down I found piston # 37505-1 about 91.5mm.that match the sleeve.the parts fisch shows 100mm sleeve for this bike.what berg is this piston for so I can get the right rings for it.and why would someone do this.thanks

hey guys I have a 2008 fe 450e.what companys make skid plates or is there a ktm model that uses the same skids to open up my options

Found a fx 450 with 25hrs for sale. Will be using this bike for single track ,enduro style ridding and club rides. Any thing I need to know or look for? Parts availability a problem? c rider on a ktm 300 right now Any thoughts?

hey guys can anyone tell me if there Is a gasket or crush washers that goes in where the head pipe goes in the cylinder.

Looking for a new seat if possible. Would prefer the tall but would also be interested in normal as well. Let me know what you have. Thx

I have three 450s here that are 2004, 2007 and 2008. and the first two i've put together run poorly at idle/tickover, they backfire and stall. also glowing headers unless I put in quite a large PJ of 45-48. It helped that I increased the valve clearance to reduce the valve timing but at...

anyone else had this trouble? I have had three owners over the years with broken liners, they break under the neck on the left hand side. I've just opened one up and found that the bottom groove has been rubbing hard and instead of breaking, it wore a groove in the wall in the area of...

Bought an 08 450 fe Berg and put less than 10 hours on it before the valve dropped into the cylinder, wrecked the head, cam, valve cover and debris dropped through the timing chain cavity to the bottom of the case... looking to buy used engine and just swap completely Thanks all!

I am looking for a low seat for my 2010 FE 450, or after market suggestions - I've got a tall seat I can use as a donor pan for an after market company. I know there is seat concepts out there, but just wondering if there are any other companies out there that offer low seat setups. Thanks