450

Picked it up last week and I absolutely love it. Is there a site that has Berg parts for the year/ model I have! Also, do they come with an hour meter? I can’t find one. Probably no way to tell how many hours/miles on it? Thank you

Hello Any one know if a 470 cylinder liner will work on a 450? the liners seem identical except the bottom cut out. will the 470 liner have a interference with the 450 balancer or the crank? https://pasteboard.co/JnoP8Z4.jpg

Hi have problem with my husaberg I found some metal in the lower filter, and after I split the engine found out it came from the kick-axle. Where it had been some how been rubbing against the casing. I wonder what I shall do so it not happening again ??

Wanted air filter wash cover for 2010 450 FX.

This WP shock came off my personal bike & is in great condition. Will fit other years and models. Mount bolts and heims included. $250 O.B.O. plus ship from 98580 Open for trades as well. Looking for a 650 piston, liner, and crank for my 07' engine build. Thanks--Don

What are the headlamp upgrade options for a 2009 450 FE? Thanks....

450 to 380 kit less gaskets, includes piston, rings,sleeve.$150.00 plus shipping.Photos when I sort a box of parts out.

Hi everyone, I am considering purchasing a Husaberg FE 450 from 2009 in Northern Italy. The bike has about 165 hours and seems in good shape from the pictures and has only been used for amatuer off-roading (I haven't tested personally yet but will do as soon the lockdown eases). Is 165...

Hi guys, I am new here, from Portugal and got a Berg Fe450 from 06, and what brings me to here is that i need to replace my intake boot and cant find a new one. It seems the part is out of production. Do you know if there is other intake boot from husqvarna or ktm that works? Thank...

So here is my reasoning. I’ve been riding for about 8 years. Both small and larger bikes. For me, I like bikes that offer what I find in my Berg. It offers a rear sub frame, high air intake, good ground clearance, low end grunt, simple and easy to get at maintenance, and a kick starter. I...

Hi All Looking for opinions on why this happend Got me a 2010 FE450 a few weeks ago Good shape , starts and works great, fast as hell Had a bit of valve noise so decided to check them , this is what i see the valve retainer is cracked and the rocker has some serious damage to it the...

TLDR; thought I was dealing with an honest person and getting a good deal. And now wondering if and how badly I got ripped off. in need of expertise. I bought a 2010 Husaberg FE 450 today. Rode fine. Started fine etc. All was good. Bike recently serviced etc. So while riding some time after...

Wanted to buy 2011 fe450 frame

Hello a really clean 2005 FE 450 came up for sale, it has 30 original hrs on it looks like new. I was hoping to find a 2007 or 8 but this one is available, does need the carb cleaned from sitting, it has some popping and sputtering going on, but starts up well and rides very nice. Well do you...

Hi av got a Fe 450 2005 was running but was bogy and bogging out after full throttle it was point to words value timing so a tryed to do value time using the 1/6 method not my greatest idea lol it will not start and will only backfire dose anyone know the right settings or know how to adjust it...

Had this FE450 for a month or so with 220 hours on it, and on startup, there is camchain slap that takes a minute or so to clear whilst the auto hydraulic adjuster pumps up. I'm told a manual adjuster is the way to go? If so, where can I get one?

Having issues getting this bike running. Turning over but just pops once in a while. ive put a V/O meter and tested just about everything. -injector was taken out sent in cleaned and flow tested -fuel pump meters out at around 50psi and can also see fuel spray while cranking -pulser...

Hi pro, s! Found coolant leaking today when I had The bike running on idle. Only after a minute or so it was dripping from what I can see a bolt for transmission cover just in front/underneat The waterpump housing. Anybody know if it's a bad sealing/bushing that resigned? // The Husa rookie...

Does anybody know will Hinson clutch from 2009 KTM 450SX to my 570 Berg? I have Rekluse on my bike and i want normal clutch back. If someone know, i would really be greatful for informations.

Hey everyone just wondering if anyone knows the torque specs for the case halfs on a fe 450 ?? I just purchased a 04 husaberg 450fe and notice the bolts were quiet loose. Are these bikes known for nuts and bolts coming loose?? Anything alts I should check to make sure it’s torqued to specs...