This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2010

  1. W

    For Sale 2010 FE450 For Sale

    2010 Husaberg FE450-STREET LEGAL!!!!! Tagged and Title in Florida-Title in hand. May not be familiar with the name, bike was built by KTM. It is an absolute beast, great power and handling. Runs and rides great, no issues at all. It is a great woods, trail and dual sport bike. I purchased it...
  2. L

    2010 Berg fe450 troublesome start

    Hi everyone, I have a FE450 and just wondering if anyone has had a similar issue as me. Rode the bike on Wednesday with no problems. Just went to start it now to go for a ride. It has no spark and can’t hear the pump prime either. All fuses are good. Battery was a little bit flat would this...
  3. T

    2010 FE450 Supermoto project

    After 265 hours the 70 degree started burning some oil due to a leaking valve seal. My machinist actually also mentioned the valves and rings were a bit tired as well so I decided to do a refresh. Some pics of the progress...A Wossner piston will be used along with a JD jetting fuel...
  4. C

    For Sale Street legal FX450 2010 low hours

    Hate to see it go but it’s just not getting enough use new link https://longisland.craigslist.org/mcy/d/manorville-husaberg-fx450-street-legal/7393421056.html
  5. T

    2010 Husaberg FE390 subframe tank problems

    I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...
  6. T

    2010 Husaberg FE390 subframe tank problems

    I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...
  7. A

    Want To Buy plate number MX FE 2010

    Hello, does anyone know the reference number for the MX number plate in white or blue for the 2010-2012 models? the FX450 had an MX plate, but I can't find the parts to order from the dealer. Greetings and thanks.
  8. N

    2010 fx450, cooling system help

    Hey guys, I have a customers bike in and he said it feels like it’s overheating. Looking at the bike, doesn’t look like any leaks from cooling system but i did notice a fan. Since it is a mx bike, do the fx series come with fans? I wasn’t too sure since it’s a mx bike but wanted to double check...
  9. C

    FE450 2010 problems. Engine stalling, help desirable

    Dear members, I'm having trouble with my 2010 Husaberg FE450. I've got the bike for a couple of months now but I'm facing some problems I can't solve... It all started after I washed the bike. The bike started to stall and I've had difficulties to start it again. After I dried the air...
  10. Y

    For Sale Stock exhaust off 2010 fe450

    I have the full oem exhaust system with like 10 miles on it. Came off a 2010 FE450 the second day I took it home from the dealer, got lost in my garage and the new owner isn't interested in it. Located in AZ, will ship at buyers expense, make an offer.
  11. M

    New Member in Salida, CO with a 2010 FE570

    Hello all! I scored a smokin' deal on a 2010 FE570 from a guy that I rode the LA/Barstow/Vegas rally with a few weeks ago. I am now in the 70° club and learning a lot about these bikes. Mine has a subframe tank, rekluse clutch, BajaDesigns light, rebuilt suspension, and some other things I'm...
  12. L

    Any advice? 2010 FE450 won't run

    I started up my FE450 and rode for about a minute then stalled, bike is well maintained and always runs flawlessly. I pulled the fuel line off at the filter and it flows fuel when I crank it (not sure how much pressure its supposed to have but seems ok) It fires right up with a shot of starting...
  13. H

    FE390 2010 |oil screen

    Hello everyone, have any of you ever seen anything like this? I bought a FE 390 2010 where the engine was supposedly rebuilt a few hours ago. Corresponding receipts are included. During the first oil change, I found the oil strainer like this... It looks like small pieces of...
  14. O

    2010 HUSABERG 390 Clutch Slave cylinder piston seal

    Good day guys: Husaberg 390 loosing mineral oil into engine after it sits for a week or more, I'm sure it will get worse in time. Does anyone have a part number for the seal on the oem slave cylinder ? or a recommended fix besides replacing the complete slave cylinder? thanks
  15. T

    2010 FE 390 stalling

    Hi all, I've got a 2010 FE390 that has been amazing until two months ago when it died on me while out on a ride. Engine would turn over but would just not fire. Replaced the fuel pump and that seemed to do the job. Got back out on the trail, started the bike and it would idle for about 10...
  16. W

    For Sale 2010 FE570 42 Hours / 826 Miles

    Sold
  17. J

    2010 450 FX air filter wash cover

    Wanted air filter wash cover for 2010 450 FX.
  18. J

    2010 FE390 - Headlight/Taillight Not Working

    Hey everyone, Been reading through several posts similar to this but haven’t had much luck as this is a slightly different situation. I have a 2010 FE390. I got an Acerbis VSL headlight (which is actually for newer model Husqvarnas) and while working to install it, somewhere along the way...
  19. S

    Fe450 2010 rear brake caliper

    Hello Has anyone manage to buy a new rear brake caliper only without the brake caliper support...looks like you can buy the support on its own but not the caliper Also does anyone know what other models/manufacturers that is compatible..can’t find a part number on the caliper unless it’s...
  20. M

    Speed dependent primary clunk on 2010 390

    Hi good folks, just purchased a 2010 390 and joined the forum. Thanks in advance for your help and wisdom. I discovered a concern when coasting down my hill today. To reproduce the issue and for troubleshooting purposes, I coasted with the engine off, clutch in, and in gear, I'm getting a...