2005

Hello, I have a big problem with my old bike. I just want to keep alive it but i can not solve common bog problem. Everything is stock. Stock carb and exhaust. Carb was cleaned. Keihin FCR MX41 Needle: OBDVR Clip 6 Mian Jet: 182 Iddling Jet: 40 Main Air Jet: 200 Idle air jet: 100...

05+ Husaberg FS I am in the Market for a 05+ Husaberg FS. FS550, FS650, FS570 If I cant find a FS for the street I will consider a Husaberg TE300 for the trails. Would prefer someone in the general area of Minnesota. If you have any of the above and are in the general area let me know...

Having 170 hours on my CFB's I figured I'd better have a look at them. I'm just taking a break to share, I'll post pics later. Have got to get it back together for a dirty ride in the morning. Same part as I've done before: 59036061090 bearing complete circa $26 ea. Only had a little...

im after a left half of a crankshaft for a 650 2005 to 2008 628 cc, Clutch side. Key way must be usable but can repair if slight damage

Hi guys ! I´ve had my Enduro-Berg for about a year and ran ~40 hurs on this little princess. Prior to me it had been overhauled with bearings and so. Previus owner said that thah was done just before 200 hours 200 was the meters reading for the milage and 74 was for the hours when I got...

I got a crack in my rear wheel and came across a set of wheels off a te250 husky. Wondering if they would fit my fe550e?

I love it so far.. but whats the best place to find aftermarket parts for example plastics....i want to go the supermoto route with this bike... any tips or suggestions to find the parts i need. Any help will be appreciated thanks..

I'm going back to a 2stroke so have decided to sell my 2005 fe450, It is in decent enough condition for a 9year old enduro bike, It always starts up easily cold or hot, the electric start even works! Just had top end refresh, new valves, double valve springs, cam bearings, and new oil pump...

I'm looking to sell my 2005 Husaberg FS650E factory built supermoto. The bike is in great shape and runs strong. It has 252hrs on it and the engine was completely rebuilt at 170hrs and the forks and shock were recently serviced. It also has a few after market parts such as an STM slipper clutch...

Hello everybody, I just added a new Berg to my stable. I cam across a 2005 FS650c that has been sitting behind a barn for most of its life. It still had the orignal filters and fluids. (Less than 10 hours) Bought it cheaper than it would cost to set my FE570 up for sumo. Since it has...

hi just wondering are there problems with getting any old slip on can for my berg? I'm looking to make it race bike now, not road so dont care about db. should I just measure the mid pipe diameter and find a slip on that fits or is it more complicated than that. thanks

Hi All I am looking for a 2005 to 2008 450 or 650 motor in running order. Doesn't matter if its from FX FE or FS models. Happy to consider all options from outside Australia and written off vehicles within AUS . Thanks Anthonys4691

2005 workshop manual

05 550 and 501 FE FORCE parts

Hope some one can help me. the control unit has suddenly stopped working on the speedo, It does nothing, any ideas??

Sold... ***sold

Looking into OEM wheels from a 2005 650 for my studded tires. Wanted to know if these will fit my 570? Life is good!

Says it all really. Anyone? PayPal? :)

Hey guys, So I have been having an issue with oil leaking off my 2005 FS650E (I KNOW THIS ISSUE COMES UP A LOT) and I originally thought it was the breather. I went for a ride today after changing the oil and adjusting the level (I thought it was too high) and I lost A LOT on a 45 minute ride...

In need of a shifter lever for my 2005 fe650e . Aftermarket or oem. Thanks.