2003

Hi guys I have been blessed with a real nice 2003 650 fe sitting in my shop. The owner lost the ignition key and ordered a new ignition for it. When it arrived he took it to a dealer who subbed out the job. Now 8 months later the job is not finished and the bike was brought to me. There is no...

I just got a 2003 husaberg 470. Is there anything I should put on it. It has a rev lock and a otoclucht

Hey Troops! Can you fill in guy not hands-on familiar with the Bergs (yet)? I am specifically curious about significant differences in suspension & handling between the 2003 model year and anything since then. Specifically, the FE650e model. Is there anything so dramatically improved...

The weakest link on my 2002 501 e-start system is the sprague clutch (free wheel mechanism). You know, hit the e-start button if the motor isn't completly warmed up and hear the starter motor kick-out and spin freely without turning the bike motor over. I replaced the sprague clutch itself not...

Hi there, I'm considering to buy an FE400 2003, but I'm a bit confused since some guys talk about the e-start problem of this model. What do you think about this bike generally and specifically. Every opinion is very much appreciated. :roll:

I just installed the upgraded chain tensioner (the plastic arm #20032901)on my 2001 fx470e,is there an upgrade to the spring tensioner that pushes againt the arm?

I just bought a new 2003 FE 501, 1 hour on machine. I had to replace the original battery with a new OEM since it would not hold a charge anymore. Regardless, with the new battery installed, I found that it has a draw on it somewhere, therefore will not hold a charge while connected. Also...

i have just brought a 2003 650 se and i was wondering if there is a upgrade for my starting motor. so i will be able to start the bike from my starter instead of kicking it over ....

just bought a 2003 400 fe berg having problems with the dellorto carbs, is there a better carb that fits my bike ?

I need new Roller Bearings for the rockerarms for my 2003 FE400e. I was sent updated bearings which do not fit the rockerarms and there seems to be no supply of old style bearings in Australia. Apparently I can purchase the new style rockerarms to take the updated bearing by these are a few...

Does anyone else have a problem with the dash display cutting out? I set the clock etc at the last event I did and not even 500 yards into lap 1 and the think had shut down!! It also has occurred on riding on the road so not just confined to bumpy conditions! Could it be related to the...

I'm looking for a new 2003 FE400E. I just missed one at MotoXotica. I live in NW Ohio. Thanks Les [email protected]

Hi Guys, Anyone know if any quiet and road legal rear Silencers are available. I am in the UK and want to do some trail riding but the standard Silencer spooks the horses where i ride. If not is it possible to get the original pipe baffled. Thanks Colin

Can any one tell me if the shaft dimensions and keying on the rotor side of the crank are the same on the 2003 650 as they are on the '04 and '05 bike. I know that there's been a change in the supplier of rotors/stators has this altered the shaft or keying? I ask because I am producing a...

Does any one know of a supplier for Radiator Guards which will fit a 2003 Husaberg fe400e? Thanks [email protected]

Please give me an opinion if you have one in regards to appropriate gearing on a 2003 fe 400e fitted with a 39 mm fcr carb :?: the bike has not been ridden yet. but soon it will be shuttling around an okay rider with bigger balls than brains or skill.it will be used out west here for general...

I am contemplating buying a new 2003 FE650 at a bargain price but is the 2004 so much better that it's worth it? I'm also wondering if the KTMs are really as good as people seem to think or is thier success just a matter of better marketing strategy? I don't find black and ORANGE to be...

I've noticed HMS is advertising left-over 2003 models in the classified section.I would like a little feedback on these from people who have actually ownwed,ridden them thanks.

I was one of the fortunate few that got a pair of OEM 2003 rocker arms at a great price when Husaberg had some spares from their early test program to market in Europe. Thank you again 'maichusa'. I ran them in my 2000 FE501E and have just replaced the Intake follower after a mixed run of...

I saw Adam85's post regarding his dyno run and exhaust readings on the dyno. His jetting is MJ 190,PJ 35 (now 56),NJ DR266,Needle K51 pos #3,Start jet 45. I figured his elevation is similar, though my ambient is considerably higher; 110F. My stock jetting MJ 185, PJ 35, NJ DR272, Needle...