2003

hi all, ive recently purchased another husaberg. the 2003 fe650 super moto. couple of things, its a pain to start broke kick start shaft so only have electric start now and thats a no go with these from cold i know :( what are they like being bumped off though does anybody know? ive heard that...

Hi all, I have recently purchased a 2003 FE501, ran fine when picked it up, quick fire up with previous owner. Took it out for a ride, fired it up - ran fine, tried again 5 mins later, no go - no spark. After reading many threads on the forum do you guys think I am safe to assume it is the SEM...

I am the proud owner of self destructed 2004 650 (valve into piston, bent rod, smashed cylinder liner etc etc.) but hey I got it cheap. I have just purchased a very low hour 2003 650 motor with all the eletrics and I have it running in the 2004 frame. I'd like to use the 2004 electrics as much...

Hi, I have been absent of this board for a long time, because I have moved from California to Austria a while ago and not been able to do a lot with my 97 FE501e. To get an imported bike street legal here in Austria, it takes a lot of bureaucracy and money. A possible shortcut is to transplant...

I just bought a Husaberg FE 650 2003. And Some teeth are broken on the clutch hub. And two theeth on the free wheel inner sprocket. (And the kickstart shaft is broken) What KTM parts fits? And should i just buy a slipperclutch?

I am looking for a rockerarmcover for one of these types! Please let me know if you have information where to get one. Mine has broken down :( Hope you can help me. Taffy? I understand you are the expert? :mrgreen: Please let me know! Cas

Unfortunately mine broke done and cannot be repared :cry: Who can help me with an used or new part? I need the complete rockerarm cover (Cylinderhead upper part) for a FE 400 type 2003. Any help is welcome! Are there any sites I can check or any other suggestions? Please let me know! Rgds...

Hi, I am looking for replacement parts for motorcycle HUSABERG FE501L (year of release 2003). The parts catalog number is 250 285-01 Ignition complete 02- (flywheel, stator and cable rubber). The parts could be secondhand, but in working order. Please contact me if you have to offer this, mostly...

Having an issue with finding a stator for my 2003 400fe, does anyone know if I can run the 04 charging system on an 03? and what would I need to do so? stator, rotor, coil etc?... :? I have also posted looking for a stator in the general section not to clutter up the forum just hope I can get...

I am selling my CBR 600 to buy a Husaberg FE501 2003. The owner says that the el-start is broken and needs to be replaced. I am just wondering where I can buy a new one and approximately how much it will cost me? I also need a new piston and sprockets, but I found them here...

I hope someone can help,my fe400 just got the mot on it and want to use it,the batterys poor so getting the upgrade,has iridium plug fitted,its the old dellorto 38mm carb reading up do i need a 35 pj to help kick start as it will fire up ok on lekky start with booster,but kickings a bugger,no...

hi guys im new to this site ive just bought a 650 off my mate after it hurt his ankle trying to kick it ,the problem i have got when we start the bike it sounds like the kick start is still engaged even tho its not as anyone else come across this problem as im just puzzled now :angry:

Hi mi husaberg 450 is not reving . carb cam valvs and intake are ok the stator is new and al the values ar spot on when messuerd. so stator to is ok timing is spot on when its on idel this is how it sounds when i try to give it gas (rev it) the sparkplug is perfeckt colur when iv had the...

Hi folks, just picked up a 2003 FE501 and getting my head round it. Ive got all the info I could from the husaberg site (owners, parts, workshop manuals). So ive not really had proper go over the bike other than 2 kicks to fire it up (Im ok with a left boot as Ive had rotax and husqvarna in the...

Hi guys I'm new to the world of Husabergs. I have a chance to buy a lightly used 03 400fe, really good shape, it runs and goes down the trail fine onlyon the 2nd rear tire, original owner. The power seemed very similar to my 01KTM 400RFS. I can see no issues, but I would like to hear the good...

I've got a clear tank for my 2003, so that and the shrouds are taken care of. But is there a white front fender, headlight shroud, and rear fender-numberplate available? Crossover to KTM? Looks like some of the small KTM dirtbikes might have the same rear fender. Also looking for a blue seat, or...

Hi all , Havent posted forever but hoping someone can help me out. I had a cam chain let go in my 2003 FS650 causing catastrophic damage(parts alone were going to be $3500) Long story short I was able to find find a 2008 650 FE. I am looking to convert it to FS trim by taking lights, signals...

Hi all, Just joined the forum and just bought a 2003 FE501e which I will collect this week. Apart from some off road biking in the 80's on a Yamaha Tenere, I am pretty new to enduro biking. I do ride road bikes though. My question is: I have seen an ad and they are offering a set of wheels...

Hi to all, Couple of months I''ve bought Fe400 03. After one longer ride I've noticed some strange sound a the top of the top head. In this video berg is started at 1:50 and you can hear that sound (like a marble in cylinder). http://www.youtube.com/watch?v=6ZFVSqhv ... r_embedded If anybody...

Does anyone know if the factory muffler has a spark arrester I dont see a tag or ID saying that it is like all my old ktm did also is there any mods I can do to the muffler to make It flow better? I got this bike jest recently and its pretty much bone stock