2003

I just had to take a last ride... I knew my chain was worn but not worn enough to snap while doing 80km/h. Outside of the bike seems remarkably little hurt by this, som scratches on the clutch slave cylinder and around front sprocket. But I fear it tore itself up inside because the engine...

Ever since I bought this bike the speedo has never worked for a second, previous owner claimed it worked intermittently for a period before dying on him. I pulled it apart and gave it the standard electronics treatment, checked connections, board, soldering points, battery but it looks...

Hey again guys! I find myself in need of some advice from more experienced people here. A while back I noticed that my electric starter would slip now and then. It would pull the engine over a few turns then spin freely until I let go of the button and tried again, or tapped it a few...

Ive made a few phones calls and sent several emails. Appears im too late and they discontinued the rekluse for my bike.. Does anyone have any other sources for an autoclutch of quality? Thanks Tim

Hello again! I started fixing up the stock exhaust on my FE650 2003 and when I took apart my rattly muffler only the rear part has packing, is this right or should I pack the front end as well?

Hey! I recently bought a 2003 Husaberg FE650. The stock exhaust on it is in pretty bad shape, loose, rattly and very leaky. I'm fairly new to tinkering with bikes, started last year with an old Honda CR250R two stroke and it now I'm hooked... I got another exhaust pipe and muffler with it that...

Hello all, I am looking for a high compression piston for my 650, wossner? I know you can get a 2mm dish, 1mm dish Tall Boy or a flat top, which is going to be best for my bike Regards Stephen

Ive looked through a few posts and cant make heads or tails of it. Im hoping some clever sod will know what im doing wrong. I have a 2003 'berg 501. Its a struggle to start, took me 3 hours of fettling to start it yesterday and it was fine. Would start on the button without issue. Went out...

Still trying to figure this thing out I ve been finding black plastic in frame directly under air filter looks like it is coming from vent on top of cylinder im thinking its coming from guides or plastic bits around cam chain ? Has anyone seen this...

where can i buy new plastics and decals ? not having much luck finding stuff

as the titles says, does anyone have a 2003 501cc liner in good condition .. the would like to sell ? if so what cost ?

Hello all, my brother was nice enough to give me a slightly rough 2003 501FE. The bike has sat for about a year and needs some attention. I knew very little about Husabergs so have spent some time on this site to get up to speed. [Great site, by the way]. This leaves me with some questions...

Hi all, Almost two mounts ago I started with rebuild of my FE501. Everything started with exchange of timing chain, upgrade to newer blade, upgrade of decompresor, sprague and starter clutch. When I take engine out of I realize that it take me hour more to strip down complete bike, so I...

Hi Where do I find parts for my husaberg fc 550 2003 ? The engine cover on the left hand side has a small crack and is losing oil so would like to replace it but can't find anywhere on line that lists the part can any one help? Rick

I want to first start by saying, I have 2 bikes. A 2004 FE450 and a 2003 FE650. The 450 starts on the button with great pace. Easily and all the time. The 650 is a dog, it struggles like no tomorrow. It will start on the button but ive always felt the battery is nearing its end. A yuasa...

I'm after an can for my berg. Offer me what you wanna get rid of. Cheers all

I recently purchased a 2003 FE650 for a great deal. Didnt want to start when i bought it. Adjusted the valves, changed the oil and coolant. new iridium spark plug and cleaned the dellorto carb. Fired right up, took it for a test ride, great. Deceleration pop noticed. Threw an fcr41 carb on...

Hello dear I have noisy cam follower bearing on exhaust rocker arm, intake is fine. Bike is fe 501 2003. Just call dealer near me and he told be that they are not available any more. Do you know any replacement or other solution? Are rockers from 2004+ compatible ? Thans in advance

Looking at a 2003 Berg 650 .. I have all the tools , and I mean all the tools .. From a knackerd screwdriver for prying things to a 60 ton hydraulic press . I have the knowings of how to use all these tools .. BUT how is the spares for a 2003 650 .. anything in short supply ? Can I fill a...

Hi people, Im having a bit of an issue with throttle at the moment, ive just replaced all the jets, gaskets and seals on my carb, it runs good BUT.....I took it round the block for a quick test run and when I hit full throttle it stuck on?? As you can imagine I was a little shocked, i pushed it...