1996

Hi there, I recently bought a Berg 350 of 1996 vintage. I have replaced the clutch/Basket/Drum/Plates which now makes the clutch work great, however on reassembly I have done something to the kick start, the lever does not spring back to its upright position. I dont have a work shop manual so...

The bike is being sold as a parts bike. The timing chain broke, the crank, clutch basket, idler and kick start gears are damaged. Engine has very good compression, the bike ran and rode great until the engine failure. I can send photos via email $550.00 Tad Petrie Washington, IL 309-634-1350...

The timing chain broke on my FC6oo. The good news is the engine has great compression with the rocker arms removed so I am assuming the valves are still straight. The bad news is a little piece of the chain made it's way into the straight cut gears in the left side of the engine. I need the...

Almost three years ago the decompression cable broke on my bike, the cable was removed but couldn't find a replacement. I have since moved and the broken cable had been misplaced. I recently found and bought a new cable on line but it is different than I remember the old one being. I recall...

I have a 1996 501 motor (96-240 scribed on head and valve cover), into which I want to fit an Auto de-compression Camshaft. I have a brand new Auto de-comp cam that I purchased with a bunch of new parts for a 1996 FE 350 motor, which is labelled (hand scribed/engraved with a motor tool) FCS M/C...

Hi Guys, Am just in the final throws of completing a ground up rebuild of a FE/FC 501 and need help with the most basic of queries, what is the orange wire on the SEM oil for ...... can it be used for a kill switch connection? The SEM Stator has Red, Black and Green female bullet connectors...

I just got a 1996 FE501 and it needs some parts. My question is where do I go to find parts for this bike? I need front and rear sprockets and chain guides. I am having a hard time finding any parts and was wondering if any parts off of other bikes will fit? Also I got it started the other day...

Hey 'Berg dudes! I'm looking for an older dirtbike to add to my stable. I found a 96 Berg FE400 for sale, low price, looks very clean considering the age. What should I be wary of? What is parts availibity like? How much(if anything) is upgradeable with the newer Berg stuff? What were common...

Hello Berg-Fans, my name is Stephen an im from Frankfurt-Germany, got some questions, maybe somebody has a few answers: Yesterday i drove a FE600 from 96, and when the engine was warm, i cant turn into neutral when running. Engine off, then it works. Then one time while starting the carburator...

hey all, I've recently been blessed to inherit a '96 501 husaberg. It is a very pretty enduro bike but it is not running. It sat for almost a year apparently, and had not been started. I had drained the gas, and changed the plug thinking that would solve its issues, but I'm unable to get it...

has anyone ever tried to fit a newer steel type of upper cam sprocket to a camshaft in a 1996 FC bike.they both are 30 tooth.is this project possible?dan

no matter how much I tried, the lights always get burnt once I open throttle. I assume its bevause the current is not rectified - I just dont know how to do it. this is the coil with red, orange, green and black wires coming out of it in addition, there is a ground plug-like component next...

I have a 1996 FC501 and it was running fine until a couple of weeks ago. Now when I try to start it, it runs very rough with backfiring through the exhaust. I have taken apart the carb and cleaned it thoughly. I have also reset the valve clearances. I am not sure if it is a timing or a fuel...

Hi, I bought my bike 2 years ago and it had no front light (it had a motocross mask) and ever since then I tried to connect the wires that I have under the fuel tank to the front light that I put there - but every time - the light bulb burns out when I open the throttle more than half way...

well i've just split my first 2000 engine and survived! i have another here as well! am i right in saying this engine started in 1996? i was pleasantly suprised at how similar it is to the 2001 - 2008 model engine. what i would like to do is build up a picture of all the...

Hello I am new here so be gentle... :oops: I know this is not a Husaberg bike, but you all seem so knowledgeable with bikes, I thought I'd give you all a try... hehehe O.k. here goes, I have a 1996 KTM 620 RXC LC4 bike with a dying problem, I fire the bike up cold and it fires...

[ I just got ahold of a 96 FE 350 Husaberg and am looking to get this beauty back in top shape. The carb runs gas through it like a baby crying and will only stop after I have had the fuel shutoff off for awhile. I have read that the floats tend to absorb the gas and become"heavy"after a few...

I have a 2000 FC501 that I'm about to spend a ton of money on the top end and am wondering if it is better to buy a complete used engine but I'm only finding them from 1996 to 1998 right now. Is there any differences that I should be aware of?

The graphics on my bike are peeling up, is there somewhere I can get OEM or aftermarket kits? The factory ones are a paint splash design.

The petcock on my bike was leaking, I couldn't locate a gasket set so I ordered a new part. When I removed the old petcock I noticed someone had hogged out one of the ports inside the petcock, it is about 2.5 times the diameter as the new part I purchased. Did these have an issue with...