1996

Help pleAse. Want some supermoto wheels for my 1996 fe 501. Needs to be cheap and easy to fit. Figure il have to machine some spacers so does anyone have suggetionz. Spacer sizes and make of rims greatly appreciated. Thanks for your time

Hi all, the laser can on my 96 fe501 is proper battered and its time for a new one. Cant fibd anythin on google for my early berg so anyone know if there are any available? Or will a can off another year or model fit? The noisier the better. Thanks if anyone replies

1989 to 1996 Husaberg - Spare Parts Manual 1989 Husaberg Spare Parts Manual 1990 Husaberg Spare Parts Manual 1991 Husaberg Spare Parts Manual 1992 Husaberg Spare Parts Manual 1993 Husaberg Spare Parts Manual 1994 Husaberg Spare Parts Manual 1995 Husaberg Spare Parts Manual 1996...

1989 to 1996 Husaberg FE 501 First Production Model Owners Manual 1989 Husaberg FE 501 Owners Manual 1990 Husaberg FE 501 Owners Manual 1991 Husaberg FE 501 Owners Manual 1992 Husaberg FE 501 Owners Manual 1993 Husaberg FE 501 Owners Manual 1994 Husaberg FE 501 Owners Manual 1995 Husaberg FE...

H20004502 can anyone know what you can use analog. the mail to Russia. with the number please.

Hi I have a 1996 Fe 400 and i cant find front or rear wheel bearings or even the sizes! If you have any ideas let me kow. Tanks Taylor

New member in the US here, contemplating buying a 96 FE 400. Talked to the owner already who seems very knowledgeable and had the stator rewound in Spain and maintained things himself. I feel good about what he's told me, I too do all my own work and if it's something I've never done, I learn...

Before my dad past his last purchace for a desert bike was a 1996 C25, AKA 604 CCM! Well 4 week's ago my bud Guy Williams calls me to ask if i wanted to buy back my Dad's old CCM? Well i said of course i will,come over asap please!! It looked great just as if it had been in my dad's hand's all...

I have a 96 FE350. The bike starts and runs great. The problem I am having is while putting around with low RPM the bike is bogging really bad from no throttle to about half throttle. If I go full throttle it takes off and nearly throws me off. It also pops alot on decel. I am riding with...

Hi, I am looking to buy the above mentioned bike, I have always owned jap bikes before this, can you guys please tell me what I should be looking out for? Thanks!!!

Hello again So I've blown out my carb now. The bike fires right up with the choke on, idles way too high, then mellows down. Feather the throttle, and she's dead. Turn off the choke and get the same result. Wandering what a good starting point is for stop screw and idle screw. Probably...

Hello out there- My decals on my '96 fe350 are not so good. Just wandering if anybody knew of a site or company that still sells "old" plastics decals. Not a huge deal. If I could, I would just want the old girl to look kind of stock. Thanks :nerd:

Hi - Here with more questions. Please take pity upon me, I'm not a motorcycle mechanic. Now I have two stators for my bike. For the black to red reading I get 1070 and the black to green reading I get 23. With the other, I get 1526 for the black to red and 49.3 for the black to green. Which of...

Hello This is my first visit on this forum. I was referred here by a Husaberg dealer. Any help I can get is greatly appreciated. So here we go - I just purchased a 1996 FE350. I was told the stator was probably bad, but I think I got a fair deal on the bike so I went ahead and bought it. Now...

Does the factory service manual exist anywhere for the 1996 models?

Hi. Im new here, and new w my bike.. so sorry if I missed if this subject already been up. But my FE400s starter just spinns the I press the starter button. I open the lil lid on the right side and saw that the gears goes around as it should.. SO what do I do now? And there do I buy parts...

I just purchased a 1996 400 with a 15/1 compression, I cannot get the bike to start with out having to pull it behind a car. Everything on the bike seems to be in great condition. Its my second bike I have owned and paid $500 for it. I guess the bike was raced in the china hat race a few years...

Can anyone head me in the right direction as to where to find a replacment timing chain? I had a helluva time finding the connecting rod but found one on ebay and bought it. That timing chain is the last piece of the puzzle, well then I need a top end gasket kit as well. Thank you in advance

Hi everyone! I have just obtained a 96 fe350 basket case. The po didn't know much about the bike and said that it needed a crank. The engine has compression and kicks through with no abnormal resistance or sounds, so I'm wondering if their is a way to determine if the crank is bad without...

Ok I am sure this is relatively simple but I cannot select neutral when the motor is running, you might be lucky and get a false neutral when moving but other than that it just does not want to select neutral, with having to kick start it every time you want to stop for a rest is a pain in the...