This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Wiring up my Acerbis headlight??

Joined Mar 2008
538 Posts | 4+
The Wirral, UK
Gents,

Just fitted one of these;

http://www.bikebiz.com.au/enter.html?la ... 732.567882

I can only get 2 bulbs (from 3), to work, one of the 36 degree flood bulbs & the pencil bulb.

Also the 2 bulbs are either on or off, there does not appear to be any difference when I switch to "main or high beam" (probably because I wired them together).

Could anyone please advise why the other 36 deg flood may not be working, and if I should have main beam functionality or not with this head light unit?

For info, I followed the installation instructions & took the live wire from each of the 3 bulbs & twisted them together, then took the remaining neutral wires & twisted those together. I used the cable fasteners for each of the two twisted wire assemblies & fitted them to the male electrical connection. I then took the live & neutral wire from both the main beam & head light loops on the bike & twisted them together?? then fitted cable connectors & these went into the female connector & plugged the two together.

Any help most appreciated

Cheers

Crispin
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions