This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Wiring a new head light

D

Desert702

Joined Aug 2017
12 Posts | 0+
Las Vegas
Hey guys I have done all the research for installing a new headlight I purchased. The light only has a negative and a positive lead on it, I used a test light on the stock headlight 3 prong connector and do not have any power to it. Does the bike have to be running in order to get voltage to this connector.

2002 Husaberg FE501.
Thanks
 
Do you have the handlebar or pull switch installed? You might have to put a switch to complete the circuit. The switch connector will be under the front plate area.
 
yes it does I'm afraid. however, if you take a look at the red/white at the solenoid, this is permanently live and will go up to and die at the ignition key. try to get that to ffed into the red over on the left handlebar switchgear. the red is the feed into the bar switch.

OK, it is only temporary but it saves running the bike.

Taffy
 

Similar threads

D
Lighting help from someone with an FE
Replies
1
Views
788
DTeuscher
D
G
2001 Fe501 - No Spark
Replies
3
Views
471
Taffy
Taffy
B
Spark for 2-3 seconds then nothing.
Replies
10
Views
572
mosierz48
M
o6550
06 fe550e - Starter Relay wiring
Replies
1
Views
531
o6550
o6550
F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
418
rikschipp
R

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions