Hey everyone. I have a 2002 KTM 400 with 20mm axle up front. I have the opportunity to buy some supermoto wheels currently on a 1998 Husaberg 600. I know the sprocket is on the right side, but can the rear wheel be flipped around backward and is it the right size? Are the 1998 Husabergs a 20 mm front axle? Any reason they can't work? Thanks
Joined Aug 2008
756 Posts | 156+
England, Southampton
Your best bet is to get as many measurements from the seller as poss. and compare to your own wheels, hub width, axle size etc.
There is a thread in this same section about putting katoom wheels on a Berg but not sure if it covers the older Bergs.
Flipping the back wheel round is will work fine, you'll just need to flip the tyre back to keep therotation arrow correct.
Hope that helps
Carl
There is a thread in this same section about putting katoom wheels on a Berg but not sure if it covers the older Bergs.
Flipping the back wheel round is will work fine, you'll just need to flip the tyre back to keep therotation arrow correct.
Hope that helps
Carl
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
