hi, im gonna rebuild my 2005 fe450 engine. i have bought the wossner piston. is this the same piston as the original one or is it better?
greets
greets
hi husaberg-newbie
i've been told that the wossner pistons are a bit heavier then std ones.
the 450 piston should have a dome onto of the piston(higher compression)
the brand of the std piston in kelko or keiko or something like that :roll:
for the pistons of the 550/650 there's a weight difference of +- 100grams betweed std and the wossner(heaviest one).don't know how much weight diference there is for the 450's.
both pistons will work just fine.
i've been told that the wossner pistons are a bit heavier then std ones.
the 450 piston should have a dome onto of the piston(higher compression)
the brand of the std piston in kelko or keiko or something like that :roll:
for the pistons of the 550/650 there's a weight difference of +- 100grams betweed std and the wossner(heaviest one).don't know how much weight diference there is for the 450's.
both pistons will work just fine.
taffy,
are you welcoming husaberg-newbie or me (too)
since i just got registered myself very recently.
i've been reading a ton about the main bearings since i've got the same issue.
my RH rollerbearing has gone.
so now i'm going with the setup from enginehardware : right roller- and left ball bearing.
will be put together upcoming week.
had the bad luck i only made about 6hrs (200km) on the bike (had 40hrs when i bought it) and had a bearing failure
had the crank lined up,it was a bit off.
keeping the CB.
hope all goes wel for about 80-100hrs...
ciao, hannes.
ps: i 'm sorta neighbour with belgiquebastard fro this forum. we live only 10km apart.
will meet up with him asap for a good ride 8)
are you welcoming husaberg-newbie or me (too)
since i just got registered myself very recently.i've been reading a ton about the main bearings since i've got the same issue.
my RH rollerbearing has gone.
so now i'm going with the setup from enginehardware : right roller- and left ball bearing.
will be put together upcoming week.
had the bad luck i only made about 6hrs (200km) on the bike (had 40hrs when i bought it) and had a bearing failure
had the crank lined up,it was a bit off.
keeping the CB.
hope all goes wel for about 80-100hrs...
ciao, hannes.
ps: i 'm sorta neighbour with belgiquebastard fro this forum.
we live only 10km apart.will meet up with him asap for a good ride 8)
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
