looking for some taller bars for my 10 570 . What do you got & how do you like them ?
Who makes taller bars for fE 570 ?
- Thread starter 1Trak Mind
- Start date
Do you or have you considered a stabiliser.
I have the scotts under bar steering stabiliser, lifts the bars about an inch.
http://www.scottsperformance.com/Stabilizer_Photos.php?ID=1376
I have the scotts under bar steering stabiliser, lifts the bars about an inch.
http://www.scottsperformance.com/Stabilizer_Photos.php?ID=1376
I run Pro Taper CR High bend, they are alot taller than stock and I like them alot and as Easyrider said if you put on a stabilzer it will raise the bars even more.
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
Thanks for the input. Does anyone run the forward bar mount ? What difference did you notice ?
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
Tried it before the risers. I felt like my weight was too far forward bt the extra arm room when standing was appreciated.
1Trak Mind said:
I run my bars in the forward mount, with an underbar stabilizer, and the bars rolled forward a bit. This set up is for standing most all of the time, cutting across open desert, and it works great.
The thing you have to get used to is that the bars will feel kind of high when you are sitting, and this tends to make the bike want to stand up in corners. And the bike can feel kind of "long" when you are climbing hills, or are in the whoops, but, again, this set up I run is for standing for long periods of time, so I just adapt my riding style to suit the other conditions.
However, with bars in this position, you can get way forward on the tank, and still have room to turn the bars in tight with your leg getting in the way.
Everything is always a compromise of one sort or another, so you just have to set it up where it is comfortable most of the time.
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
Enduro Engineering, happy with them very strong, didnt even bend when I had a massive stack ( see thread " and I just changed my fork seals ")
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
