This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

where can i get a connecting rod for the husaberg 600?

501%20con%20rod%20kit.JPG



100844 - (21005301) 600 Con Rod Kit 1992-2000 Taffmeisters Own
£241.67 600 Con Rod comes Complete with Rod, Bearing & Pin The rod is European made NOT from China and the centres are 130mm. Big end 30mm, little end 20mm. Will NOT suit later Husabergs - sorry! Replaces OEM part numbers 21005301..
Weight : 1.250
Manufactured by : Taffmeisters Modified Part


https://www.taffmeisters.co.uk/product_info.php?products_id=964
 
  • Like
Reactions: 1 person
Are 2008 FE550 conrod kits still available, or do I have to have them made by Carillo for example?
 
https://www.taffmeisters.co.uk/product_info.php?products_id=2663

I do this kit. Although I was nervous at the beginning for the 550, i knew it was good for the 501 for sure but several bought it as a last resort and they have been fine. I should have guessed that anything Honda make will be up to the job!

I have only 6 pins left ......for 6 rod kits and then that is it. The guy that made the eccentric pins died shortly after making them, the business folded. I don't want to have 12-20 rods made as the likely return before I close is slim.

Cheers

Taffy
 
  • Like
Reactions: 1 person
https://www.taffmeisters.co.uk/product_info.php?products_id=2663

I do this kit. Although I was nervous at the beginning for the 550, i knew it was good for the 501 for sure but several bought it as a last resort and they have been fine. I should have guessed that anything Honda make will be up to the job!

I have only 6 pins left ......for 6 rod kits and then that is it. The guy that made the eccentric pins died shortly after making them, the business folded. I don't want to have 12-20 rods made as the likely return before I close is slim.

Cheers

Taffy

Great, are these the only ones left worldwide, and then off to Carillo?

The excentrick pin, is to "adjust" the wrong length of the conrod?
Looks pretty difficult to get that pin pressed in at the right angle, or am I wrong?

But good to see some spares still available.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions