This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

What are some good forged alloy supermoto wheels?

Joined Feb 2015
143 Posts | 9+
Minnesota
I need some street tires for my Fe570. Thinking about going forged alloy with a crush drive.

Any recommendations?

Would these be a more affordable option over a decent set of tubeless spoked?

Also, Been going back and forth between the 5" and 4.25". I don't want it to be so tight that I have to keep an eye on it.

Anyone feel like showing their 5" fitment?
 
Marchesini If you want forged wheels or FaBa or Alpina If you want spoked tubeless. I have 2 570's one with Marchesini the other with FaBa both with 5" rears with the Marchesini being a little wider 5.3 I think it has a little rub but I put a better chain guide on the bike along with a narrower non o-ring chain and it works now with very minimal rub the bikes are in storage right now or I could show you some close up pix but it's really not bad at all. The 160 rear I run a BS 003 are a pretty wide tire and the tire selection in 160 vs 150 is huge as there are less choices in a 150 than a 160 BS makes one though but you are limited in that size more. I got my wheels from Dave at FBI (Fast bike Industries) he is a suspension guru and is a dealer in everything from Ohlins to Berenger brakes/Marchesini/Alpina wheels and he can hook you up. Fast Bike Industries :: Ohlins #1 Service Center
 
  • Like
Reactions: 3 people
Anyone know if any of the Duke models would have alloy wheels that would just bolt up to the Husaberg?
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.