This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Valves

sirsumm

sirsumm

Joined Mar 2006
47 Posts | 0+
Missoula, MT
Has ayone here had to replace valves in their older (95) engines? Where is the best place to order them?
 
try dan for motoexotica. yes many have done them. send a PM to DEZDUSTER. he'll help.

regards

Taffy
 
Is it possible to grind the valves if they are not burned very badly? If so, could I grind the valves, then lap them into the seats? I work in a machine shop, and could very easily do the machine work if this is a possibility.
 
sirsumm said:
Is it possible to grind the valves if they are not burned very badly? If so, could I grind the valves, then lap them into the seats? I work in a machine shop, and could very easily do the machine work if this is a possibility.
Click to expand...

Yes, BUT!

You will likely find your inlet valves severely cupped.
In order to remove cupping via grinding, the valve margin
will become quite thin and consequently result in
a much reduced service life.

Dale
 

Similar threads

S
300 top end power
Replies
0
Views
227
Slowdirt
S
o6550
2006 fe550e - New valve spring kit without removing the head?
Replies
6
Views
674
o6550
o6550
T
570 engine rebuild help!
Replies
5
Views
520
TurboYoda
T
A
Husaberg Fc 550 doesn’t work
Replies
1
Views
295
Taffy
Taffy
T
2009 fe450
Replies
1
Views
211
Taffy
Taffy

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions