Hi guys
Can somebody tell me correct valve clearances on my fe501 2003 been told not to go by the ones in manual
Cheers
Can somebody tell me correct valve clearances on my fe501 2003 been told not to go by the ones in manual
Cheers
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
the auto decomp works better at 4
generally looser is better for longevity
Orangeberg told me to use 5.5 when I bought my bike off him
if you do the turns method and measure the result with a dial indicator they can end up anywhere from 3.8 to 6 thou so bottom line is its not really very important
generally looser is better for longevity
Orangeberg told me to use 5.5 when I bought my bike off him
if you do the turns method and measure the result with a dial indicator they can end up anywhere from 3.8 to 6 thou so bottom line is its not really very important
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
Joined Aug 2005
204 Posts | 15+
The Netherlands
Kayeffess said:
Is the thread a M6 x 1 thread?
Normally M6 has a pitch of 1 mm, so 1/6 of a turn is 0.166 mm.
I read the 1/8 turn method is also being used, which result in a adjustment of 0,125 mm.
Ore is the thread a metrical fine thread of maybe M6 x 0,75?---> 0,75 / 6 = 0,125 mm.
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
edelweiss said:
I can't find it either but since I had the manuals already I did a Google search of this site for the file name and found the links
typing this into Google got the link
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
