Underseat Tank Mounting Pics?

HelmetFire · Dec 10, 2013

Hi All-
I assume the CDI mounting tab needs to be cut off? Can anybody give me more info on where the CDI is best relocated to?
Thanks!
Matthew

08FE650 · Dec 10, 2013

I ziptied mine to the frame under the fuel tank, was just enough room and it's away from the heat. I couldn't find anywhere else.

logjump · Dec 10, 2013

Here's some pics of what I did. The cdi is away from dirt/mud/heat and is well protected. The perfect and easy solution!

Just a piece of aluminum flat-bar with a couple strips of pre-dried silicone to help keep it from slipping back.

helithumper · Dec 11, 2013

+1 to how logjump did it.

I have relocated my ecu the same way

08FE650 · Dec 11, 2013

Aren't you guys worried about it wearing a hole in your filter?

helithumper · Dec 12, 2013

I've had my ECU set up this way for about 15,000km's or roughly 200hr's with no issues of ripping the airfilter.

bushmechanic · Dec 12, 2013

that looks good Log

my version for MX, only requires headlight removal and welding over the VIN number

the ktm RFS bikes put their ECU up near the head stock but back and on one side .. might work on a berg

helithumper · Dec 13, 2013

hey bushie

If you mount the ecu up near the headset, wouldn't you have to cut and extend the OEM wire harness?

it's a great place for the ecu if your prone to deep water crossings. Better chance of keeping it dry.

bushmechanic · Dec 13, 2013

on mine i was able to use the stock wiring

Idle · Dec 15, 2013

The previous owner relocated it here, it's ziptied on top/behind the relay.

CC76A3CA-1055-4BE8-9502-6F066E86865D-235-000000B3679FA68D_zpsdeb4dc7a.jpg

4999FB91-7592-47ED-B949-74585C742359-235-000000B37D713E33_zps2a4d65ec.jpg

Search

Search

Underseat Tank Mounting Pics?

HelmetFire

08FE650

logjump

helithumper

08FE650

helithumper

bushmechanic

helithumper

bushmechanic

Idle

Similar threads

Register CTA

Recent Discussions