My timing chain sounds like it has alot of slack.Is it auto or do I need to adjust.What do I need to buy to fix it.Thanks guy's
I assume you are talking about the cam chain. On the new 70deg engines, they are pretty noisy. I put in a Dirt Trick Cam Chain Tensioner and it is a tonne better than stock....way less noise.
The bike is a 99 400fc.This bike may have 50 hrs on it.The guy I got it from said he never rode it much it just sat in the barn.But when I ride it It make's a lot of slapping noise just after you crack the throttle then stop's when I nail it.
Joined Mar 2009
1K Posts | 251+
Portugal
Change it before its too late, then make the following changes:
If you can change the timing sprocket to a steel one, the alum. is no good.
Last, see owners docs and make a new tip of the chain tensioner (longuer one), so the chain last longuer or change the guide but don't know if its possible on the 99 engine.
:cheers:
ZAGA
If you can change the timing sprocket to a steel one, the alum. is no good.
Last, see owners docs and make a new tip of the chain tensioner (longuer one), so the chain last longuer or change the guide but don't know if its possible on the 99 engine.
:cheers:
ZAGA
Joined Nov 2001
17K Posts | 774+
Ely, England
zaga said:
I have looked at it but always been too busy to try it. the pre 2001 engines have the 2001-2003 blade but upside down! I think it wouldn't work from looking at it but need another look.
look, at £5.80 it isn't going to break anybodies bank now is it!
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
