Hi all when clutch is pulled in bike still wants to go does any one no what this could be causing this I have checked basket an there is no bad wear thanks
Joined Jan 2008
198 Posts | 30+
South Western Ontario
Check your oil level in the master cylinder, it uses mineral oil. To fill, use a cattle needle with a hose at the needle end and filled with mineral oil. Attached it to the bleeder at the slave cylinder or at the engine loosen the bleeder, now slowly push the oil back up into the master cylinder to the desired level. This well stop any air from entering the system.
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
