Supermoto rims, where to get at sensible price?

I'm in the process of putting 17" rims on my 1994. With a 20mm rear axle, the new (Behr) KTM 5" rim fits right in, but after putting a 160 tire on it, there's not a lot of room left. also, I need to shave about 5mm of the outside of the caliper bracket.

The front is slightly harder. The bike has a 15mm axle, which I will sleeve with a steel tube (20mm od, 15mm id), adding a speedo eliminator and all the space between the forks is gone. so the speedo eliminator will push against the right fork (The shoulder on the axle is now gone) I figure with the pinch bolts on the forks, and adding fork sliders, this would be an OK arrangement.

I got a brand new rear of ebay (KTM: 58410070100, for $200), the front is KTM: 58409001344, price mistake, for $387

It all depends on your definition of reasonably...

I'm pretty sure that motard wheels were not standard items pre-2000. There is a very good chance you'll find some already put together if you watch eBay patiently. Will likely be hard to find any wheels that have been re-spoked from originals with a cush-drive hub.

Also don't forget to search the forums. There's many pages on this exact topic, including lotsashit on cast wheels if you ain't racing.

Hi im getting some Marchesini supermoto wheels for my 09 fe450 but they only have a fitting chart for the KTMs. I was just wondering if anyone can tell me what year KTM has the same fitting as the 09 Husaberg. So i know which one to order. thnx

late answer but here you go!!!! any 03 onwards ktm/berg wheels will fit your 09 bike.