This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Supermoto Clamp

Joined Jan 2008
40 Posts | 0+
Stockholm, Sweden
Hi all!

Any one knows were to find a supermoto clamp for my Berg (FS650 -07).
I tried to get my hand on a clamp with 13mm offset that many Swedes use. But those seam to be impossible to buy since they stopped making them (not Husaberg themselves who made them). No used one's for sale either.

I heard Jochen Jasinski (and maybe other Germans) using another clamp with 11mm offset. Any one know who the manufacture could be or were I can buy this clamp?

Any other suggestions?

/ Barrett
 
the shortest OEM offset is from an early KTM125 from around 2001. it has 14mm offset. i have a set and they fit quite easily.

regards

Taffy
 
Ok. Maybe that could be an alternativ. What do you have to do to make if fit?

Going down to Mettet in 1½ week so I can ask the German boys what they are using. Heard that the should be with 11mm offset, and it seems to work out well.
 
hang on mate, you are running what now? 22mm? and you want to go sailing straight past 20 - 18 - 17 - 16 -14 even and go straight to 11?

anyway, i think i answered the fitment bit already.

good luck.

regards

Taffy
 
I run with the standard clamp in 16mm position (can be set to either 16 or 18 mm).

I just though you hade to modify the clamp somehow. From what I know the newer KTM clamps wont fit on the Bergs. For KTM there are clamps for 12/15 (Powerparts, but the manufactor is Xtrig)
 
I have a set of Kossman adjustable triple clamps that the previous owner used for road racing. I took them off, because the offset was set up so sharp he had to cut the front fender down so it would clear the frame. I went back to stock, but would sell if your interested. They are adjustable, so you set them to whatever offset you want. I'm not sure where they were, but I know GMD Computrac in Florida set up the suspension and triples on the bike.
 
I accutally never seen any full adjustible triple claps. How do you adjust and lock it? What are the limits?

About the clamps the Germans use it's for 50mm forklegs, so they won't work for me :(
 
I'm not familiar how they work, but if you look for kosman adjustable trail triple clamps you will find information on them. I was told by GMD Computrac that this brought the geometry to a "sweet spot" for handling.
 
sportrider said:
I'm not familiar how they work, but if you look for kosman adjustable trail triple clamps you will find information on them. I was told by GMD Computrac that this brought the geometry to a "sweet spot" for handling.

Quote from a site I found "It adjusts the angle of the forks".
Even though I havn't quite figured out how they work, that's not what I'm looking for.
 
i now possess a set of the 16-18 yokes. in pink!

ok so they need a bit of work!

regards

Taffy
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions