Still no freekin e-start

spencergt66 · Nov 11, 2011

So my 650 had the older type ADC and cam gear so I updated the cam gear and ADC sledge (old one was mush) and cam and still e-start does not have enough nuts. I'm going to try a better battery or maybe check the valves again once the piston gets to compression stroke it will not overcome the compression.it's like the ADC is not working at all?

zaga · Nov 13, 2011

Hi

If the the spring of the ADC it's not right, it will not work correctly and the starter will fight against almoust full compression.

If you can, try also to change to larger electric cables.

Good luck

:cheers:
ZAGA

ned37 · Nov 13, 2011

what year bike? what kind of starter?

spencergt66 · Nov 13, 2011

zaga said:
Hi

If the the spring of the ADC it's not right, it will not work correctly and the starter will fight against almoust full compression.

If you can, try also to change to larger electric cables.

Good luck

:cheers:
ZAGA

All new spring and ADC The spring is correct (at least i believe so I put it on the same as the ktm 525 I had) the starter is original but has the bigger cables

How tight are you putting the spring on Im pretty sure I can't get it on another wrap

And sorry forgot 03 fx 650

zaga · Nov 14, 2011

Yes, sometimes you can't give it another turn, but you can bent a little the tip that goes against the cam shaft and it will give you a bit more of spring.

:cheers:
ZAGA

bushmechanic · Nov 14, 2011

if its till too weak maybe cut some coils off

viewtopic.php?f=5&t=14669

spencergt66 · Nov 14, 2011

Hmmm I would think with the newer style parts this wouldnt have been an issues obviously it still may be

berger · Nov 14, 2011

spencergt66 said:
Hmmm I would think with the newer style parts this wouldnt have been an issues obviously it still may be

It does....I'm having the same issue currently. The spring does not fit properly. I am experimenting with by cutting out a few coils as bushy suggested.

spencergt66 · Nov 14, 2011

berger said:
spencergt66 said:

Hmmm I would think with the newer style parts this wouldnt have been an issues obviously it still may be

Click to expand...

It does....I'm having the same issue currently. The spring does not fit properly. I am experimenting with by cutting out a few coils as bushy suggested.

Have you seen any improvement or are you still experimenting?

berger · Nov 14, 2011

spencergt66 said:
berger said:

spencergt66 said:

Hmmm I would think with the newer style parts this wouldnt have been an issues obviously it still may be

Click to expand...

It does....I'm having the same issue currently. The spring does not fit properly. I am experimenting with by cutting out a few coils as bushy suggested.

Click to expand...

Have you seen any improvement or are you still experimenting?

Been real busy....might be awhile. The first attempt did not give me the results I wanted.

spencergt66 · Nov 15, 2011

Not vary encouraging

Search

Search

Still no freekin e-start

spencergt66

zaga

ned37

spencergt66

zaga

bushmechanic

spencergt66

berger

spencergt66

berger

spencergt66

Similar threads

Register CTA

Recent Discussions