Joined Jun 2007
4K Posts | 1K+
south east WA Australia
if its like the 08 just grind it off from the outside and then punch the rest of it it through with a drift
If its like newer models you just put a screw driver (flat head) under cover and slowly lever cover up,The pin that holds cover is just pushed in tight. Its like a small nail with a twist thread in it Then you put the key in the lock the centre tumbler will pull out the hole with the key in it. Hope u follow lol.
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
I don't have a key for this frame but was able to grind the pin off and remove the cover. Then with a drift of sorts, punched the lock cylinder (in the reverse order it was installed) out back through the frame cavity (not into the steering stem area). It seems that the cover is what mostly holds the cylinder in place.
It came out fairly easy.
Thanks for the help!
It came out fairly easy.
Thanks for the help!
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
