Stator dead, Electrex any good?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi all!
so...

stator is installed, cold it started for 3-4 kick, warm engine for 1-2 kick...starter is not connect so I don´t know how is it start for it :lol: a moment ago i were ride and it goes fantastic! well at last! :cheers:
 
Good for you

Once again tell me how did you timed it ?

Good ride :bounce3:

:cheers:
ZAGA
 
zaga, I can´t tell you that, because I don´t know it :lol: :lol: I set it in the middle of that three holes on stator and it runs! And it runs good :wink: Tommorow if the weather will be fine I go for a little testing trip :)
 
Hi

You should set your stator timming, and it should be with a strobe light, if you have one or can get your hands in to one.
You can try at least to make a static set, for that you try first to make one mark on the stator like the one of the SEM. If I remember right its 33º BTDC, its 33º before the pickup coil (its the coil that its alone), but you can check on your stator.
If you don't know what I'm talking about let me know.

:cheers:
ZAGA
 
Hi zaga!
ok, but why I must set it, when it start and runs good? Now I learn how to start that beast :) and I started cold engine for first kick (warm engine too). It goes to full rev 8) any ideas?? :mrgreen:
 
I've had this happen and all it is is the slide must be lowered!

regards

taffy
 
kanin said:
Hi zaga!
ok, but why I must set it, when it start and runs good? Now I learn how to start that beast :) and I started cold engine for first kick (warm engine too). It goes to full rev 8) any ideas?? :mrgreen:

It starts first kick? Something must be wrong! I'd suggest your timing is off. It should take at least 10 kicks to start cold, five when warm. :mrgreen: You know it's running top notch when it only bump starts when being pulled by a tractor.

Or you could do like me and not mess with it if she starts and runs good. But then, I'm not an expert. :wink:

log
 
somebody please tell me what´s bad on that when it starts and ride good?? 8O What could happen?
 
kanin said:
somebody please tell me what´s bad on that when it starts and ride good?? 8O What could happen?

Nuthin at all pal. You missed the sarcasim in the previous post.
 
Hi!
Kanin what was the cost of stator in Czech Republic?
My younger brother has bought one in September he paid around 680 PLN it equal 150Euro (but it was with some kind of discount)

His bike start with first kick after about 2 mounths standing in our workshop and waiting for something which can produce spark :)

Last thing for his berg were matches :))))))
(it produce a lot of sparks :) )
Damian
 
Hi!!!!
It is a lot of money!!!
My younger brother has paid for it 650 PLN in September 2011 it was around 150Euro. But as I said it was wit discount.
His bike is working perfectly well with this stator. It starts from first-second kick even after two weeks standing in workshop.


With Regards Damian
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top