Joined Feb 2014
35 Posts | 6+
Victoria, Australia
Hi all, have a issue with my fe390
Recently, when starting the bike the starter wil spin but not turn the motor, but if I put into gear and move the rear wheel it will seem to engage and then crank the motor
I have replaced the starter, tensioned the torque limiter and checked all the teeth on the gears, but haven't been able to find the issue.
On a side note, I have never been able to start the bike in gear, which from what I have read is a torque limiter related thing
Should I replace the limiter, or is there another area I should look at?
Sent from my SM-G950F using Tapatalk
Recently, when starting the bike the starter wil spin but not turn the motor, but if I put into gear and move the rear wheel it will seem to engage and then crank the motor
I have replaced the starter, tensioned the torque limiter and checked all the teeth on the gears, but haven't been able to find the issue.
On a side note, I have never been able to start the bike in gear, which from what I have read is a torque limiter related thing
Should I replace the limiter, or is there another area I should look at?
Sent from my SM-G950F using Tapatalk
