This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Start fail , when hot engine fe450

D

danielfrias

Joined Apr 2020
2 Posts | 0+
argentina
Hi I have a problem with My husaberg fe450 2010. When they motor is hot it have problems to start . O clean inyector change filters they pump run and give 3,5bar of pressure, check de wire...... Some idea? Thanks sorry for my Bad English
 
Check the resistance of the spark plug cap should be 5k ohms if not grab the the screw tip that goes in the wire and pull it out. When you pull the screw out it will have star washers that will allow it to be pressed back in clean the carbon off the nut side then reassemble press the star washers back in place with a pick . Clean the grounds by the battery and coil install a new spark plug . Watch videos on the ktm 2012 and later they are very similar to completely understand the fuel system and trouble shoot issues
 

Similar threads

G
CARBURETION ADJUSTMENT PROBLEMS FE 450 2005
Replies
0
Views
43
GMC77
G
B
Spark for 2-3 seconds then nothing.
Replies
10
Views
572
mosierz48
M
S
2009 FE450 starting problem
Replies
6
Views
819
Waw
W
W
2010 Fx450 crank no start after engine work
Replies
3
Views
476
waylon
W
T
no power to the fuel pump and lights on start FE450 2009
Replies
1
Views
501
tpayne
T

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions