make one yourself just ask parsko
for some pics and presto! you have
home made case splitter
or pm me I might be able to
dig up pics
Earl
for some pics and presto! you have
home made case splitter
or pm me I might be able to
dig up pics
Earl
Joined Jun 2001
1K Posts | 0+
Pasadena Ca.
Hey Guys,
If I remember correctly, the 95 has ball bearings on both ends of the crank shaft. Its also has kind of a press fit on both inner races to the crank shaft. This means he probably need a puller do do the job correectly with out prying between the cases or hammering on the end of the crank.
If so, the puller is only 1/2 of the job. He will also need the tool that sucks the crank shaft back through the inner race of the bearings.
I really don't know about the 95, I have done this on many 2-strokes, and on my 00 and 04 Bergs, but I made my own tooling.
Joe
If I remember correctly, the 95 has ball bearings on both ends of the crank shaft. Its also has kind of a press fit on both inner races to the crank shaft. This means he probably need a puller do do the job correectly with out prying between the cases or hammering on the end of the crank.
If so, the puller is only 1/2 of the job. He will also need the tool that sucks the crank shaft back through the inner race of the bearings.
I really don't know about the 95, I have done this on many 2-strokes, and on my 00 and 04 Bergs, but I made my own tooling.
Joe
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
