Speedo won't work on new brake disc

Jayyyxxx11 · Feb 24, 2019

I can't afford a new Beringer disc so purchased an EBC but even though I have adjusted the sensor for the speedo, it still won't pick up the speed.
Any help would be much appreciated

jdubb75 · Feb 24, 2019

Does the brake disc have the magnet installed for the speedo sensor to detect?

Jayyyxxx11 · Feb 24, 2019

It didn't come with one

jdubb75 · Feb 24, 2019

Jayyyxxx11 said:
It didn't come with one

You will have to install one for the speedo sensor to have something to pickup. It may be already pre-drilled for one and that would make things a lot easier.

Jayyyxxx11 · Feb 24, 2019

Ok, any magnet should work shouldn't it?
Does it have to be in line with the sensor? As the pre drilled part of the disc wouldn't be in line with the sensor
Thanks btw

jdubb75 · Feb 24, 2019

Jayyyxxx11 said:
Ok, any magnet should work shouldn't it?
Does it have to be in line with the sensor? As the pre drilled part of the disc wouldn't be in line with the sensor
Thanks btw

You might be able to remove and re-use the one in your old disc. If you search for motorcycle speedo magnets (or similar) you will see some options. They are usually 10mm dia. with a groove for a circlip to hold them in place. And yes, it needs to be pretty close to being in line with the sensor. You can always try one in the pre drilled location and see it if triggers the speedo when you rotate the wheel.

Search

Search

Speedo won't work on new brake disc

Jayyyxxx11

jdubb75

Jayyyxxx11

jdubb75

Jayyyxxx11

jdubb75

Similar threads

Register CTA

Recent Discussions