This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Speedo wires AHHHH Help

Joined Jun 2008
4 Posts | 0+
N.S.W Austraila
Hi all and thanks the bike now runs,

Anyway when i got the bike all the wire to the speedo have been cut off AHH!

all they left was the triangle plug with both end that still work, so the four square plug is left on the speedo not on the bike and there are three other wires one white and two gray can some one please hellp, 2002 501 with digi speedo
 
mellowyellow said:
Hi all and thanks the bike now runs,

Anyway when i got the bike all the wire to the speedo have been cut off AHH!

all they left was the triangle plug with both end that still work, so the four square plug is left on the speedo not on the bike and there are three other wires one white and two gray can some one please hellp, 2002 501 with digi speedo

4 pin plug is for tripmaster switch.

3 pin plug is optional power suppy- will work without it if there is an internal battery fitted in the speedo.

2 pin plug is for wheel sensor.

It is a genuine KTM/Husaberg unit I take it?

Hope this helps
 
RE: Re: Speedo wires AHHHH Help

Hi it helps a bit but i am missing all plugs on the bike but the 3pin so i don't know none of the colours also missing the cable from the front wheel and what ever it connects to near the handle bars
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions