Removed cylinder head today and i notice bad stripes on a cylinder
here some pictures
Should i be worry?
Look my gallery
here some pictures
Should i be worry?
Look my gallery
Normal for Husaberg based on what I've seen. Look at these photos:
http://www.husaberg.org/index.php?name= ... pic&t=9347
http://www.husaberg.org/index.php?name= ... pic&t=9347
Thnx guys for answer. I was so worry but if you say it's ok.....
...it's like a Christmas gift for me
...it's like a Christmas gift for me
its obvious that you need also oil rings , you know that don't you?
how many hours with this set of piston and rings?
its a pitty, it would only be 10 minute job, if it was an old style motor of course
how many hours with this set of piston and rings?
its a pitty, it would only be 10 minute job, if it was an old style motor of course
Last summer i ended up with broken valve spring and valve hit piston pretty hard.
Now i have WÖSSNER piston in, i hope my mechanic install piston with new oil rings.
With this new piston i have 15h max.
It's a first time ever i see in side my engine.
Now i have WÖSSNER piston in, i hope my mechanic install piston with new oil rings.
With this new piston i have 15h max.
It's a first time ever i see in side my engine.
if it does not smoke heavily then (because many woessner pistons have problems in the oil rings departement) , they still did not run in on to the liner. ussually it takes 25-30 working hours.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
