one of my rocker end caps appears to be leaking oil. from the drawing i'm guessing the o-ring is the culprit...maybe it's cut. can these end caps be removed without removing the rocker assembly?
doug
doug
Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
dougn1 said:
Hi Doug,
Yes!
Simply remove the 6 mm (5 mm hex) bolt and extract the plug.
Hope this helps.
Regards,
Dale
Dale,
not having any luck with the extraction. i removed the 5mm hex that goes thru the cap. i'm not sure what the 4mm hex that threads into the cap is for. i grab the 4mm hex and tried to pull the cap out...doesn't seem right though.
thanks
not having any luck with the extraction. i removed the 5mm hex that goes thru the cap. i'm not sure what the 4mm hex that threads into the cap is for. i grab the 4mm hex and tried to pull the cap out...doesn't seem right though.
thanks
Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
dougn1 said:
Hi Doug,
Sometimes they can be quite stubborn.
Reinstall the 6 mm through bolt, remove the 4 mm hex bolt and install a suitable handle of sorts to aid in grip for extraction. Now remove the through bolt and use axial force as required to extract the cap.
I personally use a small slide hammer on the more stubborn units.
Kind Regards,
Dale
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
