Rekluse Core Exp 2.0 slave cylinder

Glenn71 · Feb 10, 2013

I have installed the new Rekluse Core EXP 2.0 with the slave cylinder, but how can I adjust the Rekluse with the slave cylinder when the case guard is hiding the hex hole on the slave cylinder. (Husaberg FE 450 2009)

In the manual they say that for Husaberg 390/450/570 FE/FX 09-12, Husqvarna 450/510 TC-TE-TXC and KTM 125-150 Models: See setup sheet for chain guard modification.

I can’t find this setup sheet anywhere.

I think I maybe have to drill a hole in the chain guard, if not there is a special made chain guard for this? :?

dustysweep · Feb 10, 2013

Just drill a hole

Glenn71 · Feb 11, 2013

dustysweep said:
Just drill a hole

Thanks!

Then it's as I expected, but I needed to hear if any one else had experience this.

newgensti · Feb 11, 2013

My Core upgrade came with a template you could lay over the chain guard/case saver to get a hole.. I just lined it up on my drill press and punched it through.. I did, however, run into another issue on mine. I have the Moose case saver and the new slave has the bleed valve coming out 90 degrees to the left (horizontal) rather than straight up (vertical) like the OEM slave. I had to put the case saver in my mill and mill off a little bit of the case saver to allow for the new bleeder valve.

Glenn71 · Feb 12, 2013

newgensti said:
My Core upgrade came with a template you could lay over the chain guard/case saver to get a hole.. I just lined it up on my drill press and punched it through.. I did, however, run into another issue on mine. I have the Moose case saver and the new slave has the bleed valve coming out 90 degrees to the left (horizontal) rather than straight up (vertical) like the OEM slave. I had to put the case saver in my mill and mill off a little bit of the case saver to allow for the new bleeder valve.

Thanks for the reply!

I've got the template from Rekluse today, so now every thing is in order!

Search

Search

Rekluse Core Exp 2.0 slave cylinder

Glenn71

dustysweep

Glenn71

newgensti

Glenn71

Similar threads

Register CTA

Recent Discussions