I'm rebuilding my 2005 fs650e engine. I've put the two cases together and noticed that the liner sticks up a little where the head gasket goes.I read in the manual that they say to tap it down but it does'nt want to stay down when I tighten the case bolts. is this normal! should I put the head on it and tighten the head bolts and then the case bolts. any sugestions would be great.
rebuilding engine question
- Thread starter helithumper
- Start date
-
- Tags
- question rebuilding
Joined Nov 2001
17K Posts | 774+
Ely, England
helithumper said:
I would ask: are you 100% sure that the cutaway in the liner that goes over the gear in the left side is set to avoid a flat wall along the side and behind the gear?
for me, with the cases 3mm or so apart, a last little tap is all they need?
regards
Taffy
everything is good now. I loosened all the bolts on the cases and taped it down then tighten the two on the top first.
Thanks for everything Taffy. codos to you!
Thanks for everything Taffy. codos to you!
Hello.. I Have a few Qestions.. for you. I going to buy a husaberg 650fe 2007 (magneium engine) what do I need to know about the engine….. can u tell me after how many HOURS does the bike need a re-build? Thanxs mate. So now The problems with the bike,,,, it make a tapping noise they say it the values the other one is that the bike loses oil from the top part of the engine they recon that it’s a gasket where the values are and the other thing is the starter it eat’s the battery so fast but thats miner most important is the engine IS THERE ANY TIP’S YOU CAN TELL ME ABOUT THE ENGINE THAT I NEED TO KNOW TOO SEE IF IT A GOOD thanxs a lot!
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
