not sure if the bowl is worth it or not, but some sort of accelerator pump adjustment certainly is
Joined Apr 2002
3K Posts | 11+
Phoenix Arizona
I did the stop screw mod at zero cost and it works fine, allows you to adjust the fuel squirt time
http://www.husaberg.org/index.php?set_a ... _photo.php
R& D also makes a AP cover that is adjustable, gives the same result as the complete bowl change but at half the cost
http://www.husaberg.org/index.php?set_a ... _photo.php
R& D also makes a AP cover that is adjustable, gives the same result as the complete bowl change but at half the cost
have fitted barret end can and jd jet kit just a bit doughy off throttle down low just thought a few extra adjustments that the r&d bowl has with the accelerator pump and a adjustable leak jet might do the trick maybe ?DaleEO said:
if it was me i would try the cheap option (stop screw mod), you need to limit the amount of fuel squirt from the AP to around 1 second, from what i have done recently i would almost bet my left one your problem will be fixed, But if you still want the bowl i know someone that has a good second hand one for $200, also has a new crf diaphragm kit that some have used to solve the over fueling bog, pm me if you are interested
thanks for youre feed back if the jd jet kit is wrong for the husaberg i dont mind launching it and buying some other jet kit that works what would youre suggestion be ? as i rate youre opinion highly i am new to these bikes but love the things and want to get the most out of it .altitude here is sea levelTaffy said:aquajett said:
:cry: :cry: :cry:
both of these were a waste of money. the JD jetting kit was and probably still is wrong for the husaberg. a simple modification with a screw is all thats needed to limit the squirt.
regards
Taffy
cheers aquajett
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
